gsuburban Posted March 31, 2009 Share Posted March 31, 2009 Would a failed stick of memory prevent post and no video signal? I have two of these TWIN2X, with one unable to post, with the other no issue. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 31, 2009 Corsair Employee Share Posted March 31, 2009 Make sure you have the memory voltage set manually to 2.1 volts and if you still have the same problems then let's get the pair replaced! Please use the On Line RMA Request Form and we will be happy to replace it. Be sure to check the box that says “I've already spoken to Technical Support and/or RAM Guy.” Link to comment Share on other sites More sharing options...
gsuburban Posted March 31, 2009 Author Share Posted March 31, 2009 I have changed the dram volts to 2.1 with same results. Both need replaced right? Can I upgrade through this process to 2GB per dimm? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 31, 2009 Corsair Employee Share Posted March 31, 2009 I am not the person to ask that from, but once you get the RMA you can call our customer service at 888-222-4346 or 510-657-8747 Ext "3" and ask them. Link to comment Share on other sites More sharing options...
gsuburban Posted March 31, 2009 Author Share Posted March 31, 2009 Perfect ! Thanks. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 31, 2009 Corsair Employee Share Posted March 31, 2009 NP Please let me know if you have any more questions! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.