brighttail Posted November 18, 2017 Share Posted November 18, 2017 Greetings all, I have a kit of Dominator Platinum Special Edition Blackout. It is the kit they made only 500 of. In the documentation it runs at 3200Mhz but says it has been binned for 3600Mhz. Getting it there is fairly simply, just add voltage from 1.35v to 1.45v. I'm wondering if 1.50v is safe because I can run 4000Mhz and have it pass all memory tests I can throw at it. I'm just wondering if that is beyond the safe specifications of this type of RAM. I don't OC RAM often so I'm not sure about max voltage but I know that some current kits of RAM that can go to 4000Mhz runs at 1.5v stock. Any thoughts? Thanks. Link to comment Share on other sites More sharing options...
emissary42 Posted November 21, 2017 Share Posted November 21, 2017 The absolute max V the ICs used on that kit are rated for by Samsung is 1.5V. However if you loosen the primary timings a bit, you should be able to reach DDR4-4000 with less than that. For example i only need around 1.4V for DDR4-4000 16-16-16 with my Torques (on ASUS ROG Maximus IX Apex). Link to comment Share on other sites More sharing options...
brighttail Posted November 24, 2017 Author Share Posted November 24, 2017 The absolute max V the ICs used on that kit are rated for by Samsung is 1.5V. However if you loosen the primary timings a bit, you should be able to reach DDR4-4000 with less than that. For example i only need around 1.4V for DDR4-4000 16-16-16 with my Torques (on ASUS ROG Maximus IX Apex). Well I was able to get the kit to 4000Mhz on 1.46v with 16-18-18-39-t1 I did 400% passes on memtest with no issues. I had 4 errors at 1.45v. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.