HD0562 Posted July 12, 2018 Share Posted July 12, 2018 I tried to connect the cooler USB to both the Commander Pro and the Motherboard, and neither showed up in Link4. I have the cooler 3-pin header connected to the AIO_PUMP header of the motherboard and the pump does seem to be working. The cooler fans are at max rpm with no way to control them. Also, Corsair USBXp Driver is not in Device Management. Link to comment Share on other sites More sharing options...
DevBiker Posted July 13, 2018 Share Posted July 13, 2018 Your next step is to get a standard micro usb cable and route to a back panel IO port; this is only to determined if it's the cable or the cooler. Link to comment Share on other sites More sharing options...
HD0562 Posted July 13, 2018 Author Share Posted July 13, 2018 Your next step is to get a standard micro usb cable and route to a back panel IO port; this is only to determined if it's the cable or the cooler. I tried your recommendation and it still not working. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.