Hyukeii Posted January 20, 2019 Share Posted January 20, 2019 Hi, ok so long story shirt I know absolutely nothing about building in hardware. Already erased some issues but the problem was that I had no free slot for the lighting node pro on my mainboard. I didnt build this PC myself so I found another lighting node in between a bunch of cables, one slot was already occupied the other one wasnt so I plugged the RGB stripes in. I connected then all in a row and now the end obviously isnt plugged in and is dangling around a bit. Is that bad or normal? Or do I have to plug it in somewhere so that the cycle is fully closed? Thanks in advance [sorry for the long text for such a minor issue] Link to comment Share on other sites More sharing options...
DevBiker Posted January 20, 2019 Share Posted January 20, 2019 That's normal and fine. The last strip in the chain will have a dangling connector. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.