franko1985 Posted May 22, 2008 Share Posted May 22, 2008 Hi Right basically got this new system this week Phenom 9850 and M3N-HT deluxe mobo and some Corsair 4GB DDR2 XMS2 Dominator PC2-8500C5 TwinX (2x2GB). I am having trouble getting the memory to run at the actual speed (533mhz is this right ?) that it should do with cpu-z noting it as 401.8mhz. ive tried inputting EPP values manually which causes system not to boot anyone list settings to use or any ideas? http://i300.photobucket.com/albums/nn23/franko1985/cpuzcpu.jpg http://i300.photobucket.com/albums/nn23/franko1985/ram2.jpg Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted May 22, 2008 Corsair Employee Share Posted May 22, 2008 You will have to over clock the CPU and lower the multiplier to run these modules at their rated speed. But that MB is still new and may need to go through a BIOS version before its stable. Link to comment Share on other sites More sharing options...
franko1985 Posted May 28, 2008 Author Share Posted May 28, 2008 well got the ram running at correct speed but only in single mode system wont boot it in duel mode only single (having tried both sets of duel slots auto and forced ganged mode)? strange ? any ideas ? Note that people in other forums suggest it is possible to have this ram functioning normal in this mobo with the 9850 BE Phenom cheers Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted May 28, 2008 Corsair Employee Share Posted May 28, 2008 That might suggest a BIOS issue or the BIOS is not new enough for the CPU you have. Check the BIOS version supports that CPU and the CPU Support list on ASUS support site. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.