masterwishx Posted July 10, 2018 Share Posted July 10, 2018 i have 12v to 3.13v drops on hwinfo64 and also current drops on +12v to 0.6amp on hwinfo64 but on cue its not shown.. also 5.031v to 5.047v on 5v and on cue shown 5.1v to 5.0v ... thanks for any help Link to comment Share on other sites More sharing options...
DevBiker Posted July 10, 2018 Share Posted July 10, 2018 If you are monitoring the PSU in both iCue/Link AND HwInfo, that's the problem. One or both will have bad readings. Do you see this happen when you are only using one monitoring tool (ideally iCue or Link)? Note that if you use HWInfo, you'll need to stop the Corsair Service. Link to comment Share on other sites More sharing options...
masterwishx Posted July 10, 2018 Author Share Posted July 10, 2018 i have 330watt on cinebench15 insted 240watt on vccin 1.85v vid 1.15v 4.3ghz also on prime95 no avx 1344fft and on occt 330watt so i cant use stress test im getting 100c on cores and vrm after couple minutes , on aida64 i having 280watts i changed vccin and vid nothing helps ... also cue shown drops 5.1v to 5v on +5v 12v to 3.313v on +12v and currents on +12v and +5v to 0.6amp on hwinfo64 so is the problem on psu maybe??? rm1000i 7820x x299 tuf mark1 cmr16gx4m2c3200c16 asus gtx1080ti oc Link to comment Share on other sites More sharing options...
masterwishx Posted July 10, 2018 Author Share Posted July 10, 2018 yes i know i mean when only one app started or hwinfo or cue .... i have unnistalled icue becose of many drops on sensors,and backed to clink and cue ,but icue is new good application ...so i dont get if the problem on psu coze 5v to 5.1v waves is too much if i disable corsair service i will not get info on psu and wtc ??? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.