Hoffax Posted October 2, 2017 Share Posted October 2, 2017 I was playing a game when my headset started beeping that the battery was low, so i plugged in the charger, and then the headset started beeping rapidly at an even pace and wouldnt stop beeping for over a solid minute, so i unplugged the charging cable and the beeping stopped. So i tried plugging in the cable once again and the same thing happened, only this time the headset just stopped working and was no longer connected to the dongler or emitting any lights. I tried plugging the headset charging cable into another wallsocket, but no light was emitting whatsoever, And also the left earphone was super hot and smelled burnt. I updated the dongler firmware and tried pairing it, but the headset remains dead and not light is working. when i plug the headset into the computer via a micro usb to USB cable, it showed up as a "Avnera AV602" device. What do i do? Link to comment Share on other sites More sharing options...
Hoffax Posted October 2, 2017 Author Share Posted October 2, 2017 despite* not "spire" Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Nick Posted October 3, 2017 Corsair Employee Share Posted October 3, 2017 Try performing the steps Toasted outlined in his post from the other thread you posted in. If you have already tried recovering the headset via bootloader mode and it still has not helped, put in a support ticket with Corsair. Otherwise, if you pressed a button while plugging the headset in, It will put it into bootloader mode. https://support.corsair.com/ More info. on bootloader recovery. http://forum.corsair.com/v3/showthread.php?t=152196 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.