Jump to content
Corsair Community

Void Wireless Headset died and won't turn back on spire firmware update/pairing.


Hoffax
 Share

Recommended Posts

I was playing a game when my headset started beeping that the battery was low, so i plugged in the charger, and then the headset started beeping rapidly at an even pace and wouldnt stop beeping for over a solid minute, so i unplugged the charging cable and the beeping stopped. So i tried plugging in the cable once again and the same thing happened, only this time the headset just stopped working and was no longer connected to the dongler or emitting any lights. I tried plugging the headset charging cable into another wallsocket, but no light was emitting whatsoever, And also the left earphone was super hot and smelled burnt. I updated the dongler firmware and tried pairing it, but the headset remains dead and not light is working. when i plug the headset into the computer via a micro usb to USB cable, it showed up as a "Avnera AV602" device.

 

What do i do?

Link to comment
Share on other sites

  • Corsair Employees

Try performing the steps Toasted outlined in his post from the other thread you posted in.

 

If you have already tried recovering the headset via bootloader mode and it still has not helped, put in a support ticket with Corsair. Otherwise, if you pressed a button while plugging the headset in, It will put it into bootloader mode.

 

https://support.corsair.com/

 

More info. on bootloader recovery.

http://forum.corsair.com/v3/showthread.php?t=152196

Link to comment
Share on other sites

 Share

×
×
  • Create New...