Oxigun Posted April 26, 2017 Share Posted April 26, 2017 I am using 6 HD120 LED fans for nice lighting effects on my Obsidian 900D case and I'm thinking of upgrading the 3 front 120mm and the rear 140mm fans to HD LED fans as well. Before I do that however, I would like to know if there is a way to sync the two RGB LED hubs so all the fans are synced. My understanding is that if I run two separate LED hubs/controllers, the fans will not be synchronized. And if you're wondering why I'm using so many fans, the answer is obvious: Because the Obsidian 900D case rocks and because I can :biggrin: Link to comment Share on other sites More sharing options...
snapper69 Posted May 4, 2017 Share Posted May 4, 2017 If I hadn't forgotten to remove the mounting rails before I built my system, I'd probably have a couple more fans in mine too. Link to comment Share on other sites More sharing options...
red-ray Posted May 4, 2017 Share Posted May 4, 2017 CL 4.8.0.86 can't even synch the LEDs on the same hub and so I adjusted my own software to do this, see http://forum.corsair.com/forums/showthread.php?p=897164 It sould in theory be possible to synch the two ports on the same LNP, but I don't know if the LNP firmware will support this. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.