NinjaGinger Posted December 12, 2003 Share Posted December 12, 2003 I have the IC-7G and due to a fault I am looking at a different board, will the IC7 Max be ok with my memory. It is two matched pairs of DDR 3700 512 meg per stick, and If ok, any setting I need to know, eg voltage, parity etc. Thanks :question: Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted December 12, 2003 Corsair Employee Share Posted December 12, 2003 They should be fine! But with 4 modules I would not try to over clock the system and you should sett the timings manually to Cass 3-4-4-8 and I would set the Dim Voltage to 2.7 Volts. Link to comment Share on other sites More sharing options...
NinjaGinger Posted December 12, 2003 Author Share Posted December 12, 2003 Thanks, when the board arrives I shall let you know how it goes. :D: Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted December 12, 2003 Corsair Employee Share Posted December 12, 2003 Please do let me know, No matter what, I will be interested knowing how you make out or happy to help if you should have a problem. Link to comment Share on other sites More sharing options...
NinjaGinger Posted December 20, 2003 Author Share Posted December 20, 2003 Just to let you know, the board and memory seem to be working OK. I used the settings you recommended. thanks for the info. :): Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted December 23, 2003 Corsair Employee Share Posted December 23, 2003 N.P. And Merry Christmas Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.