Search the Community
Showing results for tags 'ups'.
Found 4 results
-
Greetings. I have a AX1600i power supply in my computer. I do machine learning/AI so typically have a power hungry GPU running. We had power issues awhile back and I ended up replacing the motherboard due to this. I'm putting a UPS in to stop this from happening again. An expensive lesson. However. This is the UPS I am getting: https://www.scanmalta.com/shop/2000va-cyber-power-mainstream-online-tower-ups.html The sockets at the back appear to be IEC C13 sockets. How would I connect the AX1600i power supply to this? What cable would I need as I have no idea what the socket is in the back of the PSU. I would also want to ensure a monitor is plugged into this as well and that's currently using a normal UK 3 pin type plug. Thanks, Colin
-
Is the RM850X Active Power Factor Correction??? In user manual there is nothing about. Need to know for correct UPS. Think this should be displayed in user manual as well PSU Label as a warning, due to is very important.
-
I live in Mexico and sometimes (once every 6 months on average), electricity flickers for a second, not enough for some equipment (like a TV) to go off but enough for something like a PS4 to turn off and make awful noises from the spinning disk. Should I connect my PSU RM850x to a AVR or surge protector or UPS?
-
HI GUYS NICE TO BE HERE i am into my first serious build... Need advice on capacity of UPS (Uninterruptible Power Supply) My Build config. is as follows:- Power Supply -> Corsair AX1600i CPU ->Intel Core i7-8700K 3.7 GHz 6-Core Processor CPU Cooler -> Noctua NH-D15 Motherboard -> Asus PRIME Q370M-C/CSM Micro ATX Memory -> Corsair Vengeance LPX 32 GB (2 x 16 GB) DDR4-2666 Storage -> Samsung 970 Pro 1 TB M.2-2280 SSD Video Card -> Asus GeForce RTX 2080 Ti 11 GB ROG Strix Case -> Cooler Master MasterCase H500P Mesh ATX Mid Tower the build has a wattage of around 500Watts as of now. i will be building upon the system in the coming year. the system will be used for running Research SIMULATIONS.. the insurge current for corsair Ax1600i is about 21.03Amps refer below link https://www.techpowerup.com/review/corsair-ax1600i/5.html Please recommend a UPS which would cater to 80 - 90% PSU load keeping in mind the insurge current... and a backup of about 5 to 10 minutes THANKS ShrikeM
