BIDOANIE Posted March 12, 2020 Share Posted March 12, 2020 So , i've bought a Corsair Carbide Spec Omega RGB case with a corsair H100i aio cooler. The case came with 2 hubs, the Node PRO and the Fan hub and 2 fans, HD i think they are. I've connected the fans to the port 1 and 2 on the fan hub, they'r leds are good and light up, but all the colors are active, but watching them from the sides it's only the color red. The fan hub it's connected to the port 2 on the Node Pro and the node pro with a usb to my MB. The front panel rgb line it's connected to the port 1 on the Node. I tryed switching them, but when i insert the case line rgb into the 2nd port it dosn't light up and when i unplug the fan hub cable from the node they stays active (the fans), i guess the node pro is broken or the icue isn't detecting the 2 fans. I have read that in icue the node pro is considered the carbide spec omega case, but when i put in the lightning channel 2 hd rgb fans and then select 2 fans it doesn't happen anything to my fans, just in the program where i can controll the lighting, still nothing happening to my fans. Link to comment Share on other sites More sharing options...
BIDOANIE Posted March 22, 2020 Author Share Posted March 22, 2020 https://www.mediafire.com/file/4kzy95gcndotlc9/20200322_031034_1.mp4/file with this video i show what's wrong with my fans Link to comment Share on other sites More sharing options...
BIDOANIE Posted March 23, 2020 Author Share Posted March 23, 2020 Can someone at least say "we don't know" or something? Link to comment Share on other sites More sharing options...
BIDOANIE Posted March 25, 2020 Author Share Posted March 25, 2020 I found out that it's a fan problem, not a node pro problem. I connected my LL fans to the rgb hub and i can control everything ok. So can someone help me with my "non rgb customisable" fans ? Link to comment Share on other sites More sharing options...
Recommended Posts