Caunter Posted April 16, 2018 Share Posted April 16, 2018 Does the Asus Rog Zenith Extreme fit in the Obsidian 500D case? Some sites say that the case is eatx compatible, but I was wondering if anyone here has done it. PcPartPicker.com states that there is no compatibility issues. Thanks in advance! Link to comment Share on other sites More sharing options...
Trinescity Posted April 17, 2018 Share Posted April 17, 2018 It uses the same internal layout as the 570x, and I've seen a TR build with that motherboard and case. Even Corsair says it supports the Rampage VI Extreme (Which has the same dimensions as the Zenith Extreme). TL;DR, It fits. Link to comment Share on other sites More sharing options...
Caunter Posted April 17, 2018 Author Share Posted April 17, 2018 Trinescity, thanks so much for your help! I purchased the board today, and checked the fit. You were right, it does fit (a little tight). All screw holes line up, and nothing has to be modified for flush placement. For anyone trying the same combo, the board does cut all the right side routing holes in half (vertically). It's still not a problem however, the cables can still be routed through. Just something to consider. Link to comment Share on other sites More sharing options...
einsindrei Posted April 17, 2018 Share Posted April 17, 2018 I used a Asus Zenith Extreme in an 570X Case. THe 570X is similiar to the 500D, i think its fit Link to comment Share on other sites More sharing options...
Corsair Employee Corsair StormShadow Posted April 18, 2018 Corsair Employee Share Posted April 18, 2018 sounds like a pretty expensive build, good luck! do share some photos when you are done! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.