Jneg74 Posted September 5, 2015 Share Posted September 5, 2015 Hi just bought and installed the h100i i looked around for some info on what the pump temp max is or should be around in yhe bios the fan header is locked at 60% speed it wont let me change the pump speed. Now in the Corsair link there's 1,2,3,4 times its set to two automatic [about 2200rpm] or should it be maxed i seen over 4000 rpm from i think is max? Link to comment Share on other sites More sharing options...
Toasted Posted September 5, 2015 Share Posted September 5, 2015 The H100i's pump speed is not adjustable. It will always run at max speed of ~2200 RPM. Link to comment Share on other sites More sharing options...
Jneg74 Posted September 5, 2015 Author Share Posted September 5, 2015 I put a custom curve my fx 8300 OC at 4200 stays under 48c full load testing and gaming 40-45c i feel those temps are ok but am worried about the pump temp which it stay around 38-46c are those temps normal or should they be lower? Link to comment Share on other sites More sharing options...
cavey00 Posted September 5, 2015 Share Posted September 5, 2015 I think you are ok. Even in custom water cooling the pump speed has very little effect on cooling as long as there is a minimum flow. Same with fan speed on the radiators I've found, at least once you've ventured into overkill region :p: Link to comment Share on other sites More sharing options...
Jneg74 Posted September 6, 2015 Author Share Posted September 6, 2015 In quite mode wich i like cause very low noise cpu temp stays under 50c but my pump temp will rise to 56c this got my worried. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.