ryouga Posted July 6, 2020 Share Posted July 6, 2020 Reworded another thread, basically I had a dead AIO so sent it back and got a replacment. The replacement works great, but the pump LED's don't work despite having latest firmware. USB connected fine, sata connected fine, 3 pin connected fine. Link to comment Share on other sites More sharing options...
davinohunk Posted July 6, 2020 Share Posted July 6, 2020 Same issue here. Been through so many forums about the same issue and no fix. Link to comment Share on other sites More sharing options...
Ellpumpo Posted July 8, 2020 Share Posted July 8, 2020 I have the same problem, from other post I've seen you need to have a 5 pin SATA connector, my PSU don't have one. It as the 2 black, yellow and red cable, then it as an orange https://www.lifewire.com/sata-15-pin-power-connector-pinout-2624584 Link to comment Share on other sites More sharing options...
optimummind Posted July 13, 2020 Share Posted July 13, 2020 I ran into the same issue until I used a 5-wire SATA power connector. Right after I plugged the cooler to a 5-wire SATA connector, the RGBs lit up. Link to comment Share on other sites More sharing options...
ankorarya Posted July 21, 2020 Share Posted July 21, 2020 Who knows if an adapter works? For example I have a PSU with 4 wire and I want to connect an adapter with 5 wires. it's work? Link to comment Share on other sites More sharing options...
Recommended Posts