makatech Posted December 4, 2018 Share Posted December 4, 2018 Hi, New H115i RGB Platinum owner here. :-) I managed to change performance profiles for fans after clicking edit all devices but I can't change performance profile for the pump, what am I am missing? I have updated firmware and software. Pump connect to aio_pump on my Asus Prime X370 board. Link to comment Share on other sites More sharing options...
makatech Posted December 4, 2018 Author Share Posted December 4, 2018 It's only possible changing fan profiles settings and not the pump performance profile? Is this the way it is supposed to work? Link to comment Share on other sites More sharing options...
c-attack Posted December 4, 2018 Share Posted December 4, 2018 The pump on that unit is a 2 speed model. “Quiet” will be 2400 rpm. Extreme just under 3000. To apply a profile to the pump or fans, first click the profile on the left (quiet, balanced, extreme, custom cooling mode). It will highlight yellow. Then click the pump or fan you want to run that curve. It will highlight yellow as well. It’s opposite the more common select the device, tell it what speed. In iCUE you select the speed and then can apply it to multiple fans or the pump. Link to comment Share on other sites More sharing options...
makatech Posted December 4, 2018 Author Share Posted December 4, 2018 The pump on that unit is a 2 speed model. “Quiet” will be 2400 rpm. Extreme just under 3000. To apply a profile to the pump or fans, first click the profile on the left (quiet, balanced, extreme, custom cooling mode). It will highlight yellow. Then click the pump or fan you want to run that curve. It will highlight yellow as well. It’s opposite the more common select the device, tell it what speed. In iCUE you select the speed and then can apply it to multiple fans or the pump. Many thanks :) I will try later today. Link to comment Share on other sites More sharing options...
makatech Posted December 4, 2018 Author Share Posted December 4, 2018 The pump on that unit is a 2 speed model. “Quiet” will be 2400 rpm. Extreme just under 3000. To apply a profile to the pump or fans, first click the profile on the left (quiet, balanced, extreme, custom cooling mode). It will highlight yellow. Then click the pump or fan you want to run that curve. It will highlight yellow as well. It’s opposite the more common select the device, tell it what speed. In iCUE you select the speed and then can apply it to multiple fans or the pump. It's working perfect, thanks. :) What confused me yesterday was probably the fact that this is a two speed pump and thus it will be impossible running it in balanced performance mode (which I tried...). Link to comment Share on other sites More sharing options...
c-attack Posted December 4, 2018 Share Posted December 4, 2018 Yes, that is correct. The Pro series coolers are the only ones with 3 speeds (it has an extra low 1100 rpm setting). All others are two speed. Sometimes I wish they would differentiate the fan profile "presets" from the pump settings, but I suppose that also keeps the user interface cleaner. This makes "Quiet", Balanced, and Extreme different on each cooler model. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.