knacker40 Posted January 31, 2020 Share Posted January 31, 2020 is it possible to set the rgb lighting to change from say blue to purple to red subject to temps increase? I have a custom waterloop in a 680x that I would love to be able to monitor the temps by rgb so if temps was under say 50c to be blue, 51-75 purple and 76+ red? Is this possible, if so how? I currently do not have a CP installed as I am using an Aquaero 6XT for my fans and pump but icue for the rgb lighting. I do have a CP but would only use if absolutely needed due to the space and USB aspect as have run out of spare USB2 even with a Splitty Thanks Link to comment Share on other sites More sharing options...
xMacias Posted January 31, 2020 Share Posted January 31, 2020 Under lighting effects in iCUE, there's a "Temperature" lighting effect that will do what you want. You'd be able to control that by using a Commander Pro which you say you have. If you're worried about the USB ports, the CP does have 2 additional USB headers on it to help out. Link to comment Share on other sites More sharing options...
knacker40 Posted January 31, 2020 Author Share Posted January 31, 2020 I've seen that- where does it get the temps from Link to comment Share on other sites More sharing options...
knacker40 Posted January 31, 2020 Author Share Posted January 31, 2020 think I've found it under hardware lighting- CPU package, GPU and DIMMS Link to comment Share on other sites More sharing options...
Recommended Posts