View Single Post
  #3  
Old 08-23-2019, 12:26 PM
mikefot mikefot is offline
Registered User
mikefot's PC Specs
 
Join Date: Aug 2019
Posts: 6
POST ID # = 1015483
mikefot Reputation: 10
Default

A great many thanks for the prompt response........

I thought I had attached the 3 pin plug (the one coming from the pump housing which is a very thin wiry looking cable) to what I thought was the 3 pin cpu fan socket on the motherboard.

I will check again carefully and make sure.

I cheated as you worried about and set the *ignore* setting in the BIOS and fired up clear linux OS....

The OS booted up OK and I then ran *watch sensors*. I could feel some warmth emanating from the radiator.

The temperature seems to have kept on the low side (32C).

But of course the cpu fan setting according to watch sensors remained at 0 rpm the whole time.

Which it would do since I turned off the monitoring of it in the BIOS....

The chassis fans are turning round.

Regards

MF
Reply With Quote