Ecyl

JWAR.... TY for your reply. The AIO I am using is the icue H100i Elite Capellix and the am using the Fan controller that came with it. I have yet to have enough time to get to the MB settings in the UEFI, before it shuts down. I can watch the CPU Temps rise that's about it. It does not boot at all if the sata to controller connection is plugged in. There is a AIO fan header on the MB and I plugged the small Molex that's connected to the CPU cooler into that, but I am not sure that's enough to run the pump. I have plugged the USB header from the controller into every port on the MB, and attempted to start without success. I am using brand new power supply with correct 5 wire sata connections as mentioned as a problem in the FAQ. I hate to tear it all down to return to theegg, so many parts. Especially if its just the controller I am not certain how independent the two are from each other. I could give a damn about the color.

Hoping for some group / Hive brain thoughts, I think its the controller not sure how much it affects the pump. Its a new build and I have issues with the cooler. Machine will post when RGB controller is unplugged from SATA power adaptor, but if plugged in it wont boot. Fans plugged into MB will spin for a hot second, but no post. Does not seem to matter if USB header is connected or not. At no time am I getting any lights at the CPU Cooler itself and the radiator fans spin if not plugged into RGB controller. It obviously shuts down after a few since its not providing power to the pump. Verified all connections like it was an OCD. Corsair rm850x Power supply Asus 670E +Wi-Fi Motherboard Ryzen 9 7900x Corsair Vengeance DDR5 6000 PC 548000 2x16gb