Jimmy Cmpit

CX Series™ CX650F RGB — 650 Watt 80 Plus® Bronze Certified Fully Modular RGB PSU (corsair.com) I'm not a big LED user and outside of my H100i cooler the only other LED device is the PSU. I would like to know if I can use this PSU without a LED controller as the presets from the button on the back of the PSU don't give me a lot of options. Below is the jumper layout of the MSI MPGz490 Gaming Wi-Fi mobo. I'm not sure what jumper on the mobo might support the PSU LED or if the RBG IN is the correct cable port to do this if I can do this. I currently have the PSU connected to JRGB1 but the PSU doesn't show in iCUE and I'm reluctant to run the update on iCUE, . If I could shut the LED's off I would; and yes, I could have bought one w/o the LED, like the Nazi's could have not opened a war on two fronts. Hindsight may be 20/20 but unlike the Nazi's I don't want to pay postage to return a PSU.

it doesn't sound like the pump or the fans are doing much more than a nature walk at this point. what would be a good method of determining if the unit is compromised or under normal operations. when it went full throttle again after reboot, shutdown and it sounded more or less normal. I've rebooted a few times since them, put the system to sleep, so far nothing has made it rev up outside of some heavy lifting in Blender. These my temps in F and C respectively

Currently running iCUE v4.14.179 which prompted for update. Update failed then appears to have turned off my H100i cooler, fans kicked, CPU temp went from 32c to 91c, system became erratic and reboot did not correct this, shutdown appears to have. I don't know what the default shutdown temp is in the BIOS but it did not trigger. Outside of XMP I'm not using OC on an unlocked