IROnn

If you mean 500rpm at max speed, it seems to be a poor speed. Did you try to force upload like c-attack has said to me? Maybe it can fix your problem.

It works when I force the update! I noticed that fans run at max speed at 1850 rpm, I suposo that is normal, it's impossible 2200 rpm due the air resistance I imagine... Thanks man!

This steps are on ICUE, isn''t it? Ok I'll try it and I will let you know the result. Thanks! Edit: Well, they both are running at 1800 rpm, is not the max speed maybe, my fault. but they problem is the same, I can't change this value.

Thanks for reply. What do you mean by "forcing update"? I have the ICUE firmware updated to the last version.

The 2 water cooler fans are connected to the pump. Then, it is a cable with a 3-pin connector that cames from the SATA cable. There is only one pin inside the connector, the other 2 are empty. I found in Google that it is for connecting it to the CPU fan because this avoid the error of the bios “not CPU fan detected”. The real control of the fans is via USB by the ICUE software. And yes, y created profiles and it doesn’t work.

Hi everyone, I have the Corsair H115i PRO XT and the 2 fans are always maxed out. I don't need as much when I'm surfing the internet or at the desktop and the noise gets annoying. ICue does nothing, if I change the profile to silent or modify the curves, they keep running at 100%. Any ideas? I have the 2 fans conected to the pump, the USB cable connected to an USB connector on de motherboard, the Sata connected and the 3 pin cable connected to the CPU fan (I think the CPU Fan connection is only for not geting BIOS error for not CPU fan found). My coolant temps are 27-31 While playing and my CPU temps are between 59-70 while playing.