Suicidal Terror

Well in the end, I got everything I needed. I went with the fan on the front with rad behind, so far these seems great as my CPU temps stay pretty low (28c idle) and in game so far only tried Rust but around 55c @ 4.8Ghz / 1.28v. Only downside is with this I can only have 1 fan on top. The RGB fans are too thick to fit where the coolant pipes leave the rad. I might fit a Noctua Slimline fan in there. I'm just testing for a bit and monitoring GPU and CPU temps before deciding what to do. I might move the rad to be mounted on the roof then I can fit the 4 fans, unfortunately due to 3060TI size and Motherboard (mATX not mITX) I cannot fit fans on the bottom. Another option would be to mount the RGB fans on the TOP of the case but I'd need some sort of extender for the top glass... it is possible I suppose. It'd need a roughly 30mm lift to fit the fans between the top of the outer case and the bottom of the glass. Does anyone know the thread pitch/type for the top glass screws on the 280X case? Here's a picture of the build finished https://i.imgur.com/FGYaOMA.jpg

Thank you! This is great information. I'll post up a pic when I'm finished. Parts arrive tomorrow :) I just hope the h100i fits on the front as intake and the Gigabyte 3060ti oc pro fits...

Hi all First post here, was referred from Reddit :) I need some assistance, I've spent hours researching and I'm understanding most of it, but not all. So I've just bought a Corsair 280X , h100i Capellix Elite and CX650F RGB I'm teaming this with i5 10600k and RTX3060ti already running on my system. I'm just moving to new case, PSU etc. Currently I have 3x SP120 RGB PRO Fan The 280X comes with 2x LL120 Fans the H100i Capellix comes with ML120 Fans and I have the 3 SP120 fans I mentioned. Plus the PSU, but I'm happy to not have this controlled by iCue for the moment, as on the 280X case I have it will be out of sight anyway. What I propose is - Rad mounted on front of case as intake with 2 Fans - 2 intake fans on bottom - 2 exhaust fans on top So 6 Fans in total - which should be fine for the Commander CORE. From my research it seems I can combine the LL120 and ML120 fans on the included Corsair Commander CORE that comes with the Capellix Elite AIO. Post Can I add the SP120 onto the Commander core as well?I don't care too much for fan speed control on the SP120, they can run at 100% for all I care. I just want to know if I can combine these 3 types of fan on the Commander CORE SP120 RGB PRO which I have already ML120 Included with the h100i Capellix elite. LL120 that come with the 280x case I understand some RGB may behave funny but I'm not super bothered about that as long as they all light up :D I will migrate all to LL120 fans eventually but I've just spent £500+ on the case, PSU, cooler and M2 drive, and £800 on other components within the last few months, so want to try and keep my cost down