Aeternus

I have a Commander Pro and a Commander Core plugged into my x570 Asus Dark Hero, but none of the USB ports on the CoPro work and the Commander Core works fine (they're plugged into USB 2.0 on the motherboard itself, and my PSU and Lighting Node are plugged into the CoPro USB ports). I've seen a few people on forums mention the same thing. I haven't updated my bios yet since I just finished the build but is this a thing?

If you use a Commander Pro on USB 2.0 #1 and Commander Core on USB 2.0 #2 (on the motherboard) I understand they'll show up as two separate devices in iCUE, but will the fans be able to configured in some kind of order? Say for example you have: #1 - 5 QLs for power on the Commander Pro and RGB going to Lighting Node (which connects to one of the Commander Pro RGB inputs) #2 - 5 QLs for power/rgb on the Commander Core If you wanted to set a Visor lighting theme, is there a way to make it go sequentially or both devices work independent of each other?

Memory on Zen 3 is sort of a new thing so I can't find much info, but I was looking to get the Dominator 3600 (CMT32GX4M4C3600C18W) is there any reason not to get 3600 CL18 over the 3200 CL16?

Thanks, I didn't realize there was a Capellix sticky at the top here which answered some of my questions, but I appreciate you responding anyway. I think I'll end up using both since I have a fair amount of stuff going on for a motherboard with two USB 2.0 inputs Motherboard USB 1 - Commander Core which will handle 6 QL fans for speed/RGB Motherboard USB 2 - Commander Pro which will handle USB for PSU and 1 Lighting Node Core. The LED inputs on Commander Pro will handle an RGB Strip and the LED input from the Node Core. Node Core will handle LED for 3 more of the QL fans and Commander Pro will do power for the final 6 fans (power for 3 QLs and 3 MLs but RGB for the MLs won't be hooked up anywhere.) At least.... in my head that makes sense lol.

Hey everyone, As I recall with my H100i, there was a cable to connect both fans on the radiator which then in turn were recognized in CPro through the USB connector coming off the pump. For the Capellix, I assume the Commander Core is supposed to take place of this? The reason I'm asking is because I'm doing a build in an O11 XL and I can probably push/pull on the radiator if I side mount it. I'm using two CPros since I need 3 LED inputs for 9 QL120 fans and an RGB strip, plus I need 4 USB headers for the PSU, AIO, and the two Node Cores for the QLs. So my question is, on the CPro, can I control the fan speed in iCue for a mix of 9 QLs and the 3 MLs? I won't even bother using the LED connector for the MLs since they won't be visible (and you cant mix fans on the same LED hub), I'm just interested in whether or not there's an issue with mixing fan type on CPro simply for controlling fan speed only. Thanks! Edit: Also, now that I'm looking at it, is there any way to use only a CPro to wire to the Capellix? On Commander Core it looks like there is some 24 pin input that's required that comes off the pump.