Jcola

Thank you for your instructions. Helped a great deal.

Viper4060, thank you for replying. Let's see if I'm clear on this. The one that plugs into the CPU Fan socket is the one that is on the SATA cord with a three pin socket of which only one pin is being used. Correct? The other 2 four pin sockets I described in my post are for RGB and are not necessary to connect for cooling. Is this correct?

I'm in the process of installing the Corsair H115i Platinum liquid cooler in my new build. I'm using an Asus ROG Maximus XII hero Z490 mother board. I have connected the SATA plug to a SATA Cable from the power supply and I have connected the plugs from the pump to the two fans attached to the cooler. I'm not planning on using the RGB connectors from the fans. However, I have a question about three other connectors that come from the pump. The SATA cord includes a second connector. It looks like a fan connector but it has a single wire in it. Where does this connect to? I'm thinking that it should go to the CPU Fan header. The next cable from the pump has two plugs on it, one with four pins and the other with 3 pins (picture attached), both plugs have male pins. This one has me entirely stumped as the mother board I'm using has no female plugs on it, other than the SATA ports and a USB port. Where do these go?