Fantasm

Ok thanks! So plugging all the 4 pin headers for my fans, both ML140 RGB high speed and ML140 RGB regulars into the fan ports labeled 1-4 on the CoPro, and the 4 RGB cables into the RGB Hub, which then connects to the CoPro LED slot will be fine? Appreciate the assistance c-attack!

Thanks for the help everyone! I’m going to go ahead and just use the 2 ML140 RGB fans I ordered and try to set all 4 to cap at 1200 RPM. For the lighting, the manual states I should connect both fan RGB cables to the pump RGB connector. Is this still true if I using 4 fans instead of the stock 2? I have a lightning pro and a commander pro as well. In this instance should I hook everything up to the commander? Does that include the pump in anyway? This is my first time using the Corsair eco system for RGB/fans so apologies if these are dumb questions!

Hi all, I just recently purchased an H115i Platinum and am currently in the process of stripping components out of my old rig to set up my new build. I wanted to run a Push/Pull configuration because the case (SL600M) only features 2 points of entry/exit for airflow, which is the top and bottom. Sides, front, and back are completely closed off. I bought a 2 pack of ML140 PRO RGBs, because according to the H115i Platinum page, those are the fan models the cooler ships with, and I wanted to keep things as consistent as possible. On the H115i Platinum tech specs page though, it lists fan speed at 2000 RPM. Is this in error? The ML140 PRO RGB spec page shows fan speed at 400-1200 RPM in comparison. I read some information here about making sure fans speed and curve were synced for push/pull configs, and wanted to check that I'm actually getting 4 of the same fans, or if the fans that ship with the H115i and the fans offered in the 2-pack are actually the same models. Thanks for the help!