puritos

Today i tested one thing i reverted my h115i fans and put them as intake (in the top) and my h115 temps are clearly better ( 41º maximun on load) but my gpu temps are a bit higher. Looks like my case doesnt work pretty well with the radiator exhausting in the top so i ordered 2 extra fans to test it as a intake in the front (with push+pull config) and i will post the results when they arrive. Again thank you all for your time and your suggestions.

Thanks i will try tomorrow what u 2 suggest.

Thank you so much again. When im running cpu+gpu and the coolant go to 50º my motherboard temps go to 40-47º (it have 2-3 sensors) and my drives go to 51º (Nvme 970 evo) and 38º (ssd Crucial). I will try to tweak and try different profiles for my exhaust/intakes fans and see what happens. Again thank you so much for your time.

Thank you so much i tested what u suggested (with cpu-z) and those are the results with 24º ambient temp and 30 minutes stress test. Test Start: - Coolant temp: 30º - Cpu temp : 30º - Speeds : Fans 600 rpm Pump 1100 Rpm Test "peak": - Coolant temp: 38º - Cpu temp : 57º - Speeds : Fans 1000 rpm Pump 2800 Rpm It goes back to 32 coolant temp in 3-5 minutes. Conclusions: Looks like only heavy cpu "works" give me a normal and expected temperatures and it only goes to 50º when im doing cpu+gpu intensive works. Can the gpu be culprit? (Aio tubes are really close to it) or can be something related to airflow ? (as i said i got 3 intakes + 1 exhaust at 900 RPM + h115 fans at exhaust). I dont care too much about lower my cpu+gpu temps because they are not really bad and my pc its silent with this profile but im worried because i think that maybe 50º Water temp can be dangerous for the AIO.

Thanks for the fast reply. -I have a 2080TI (asus strix). - My case is Cougar Panzer Evo -Front: 3 intakes fans -Back : 1 exhaust fan -Top : H115i Pro Fans at exhaust in pull configuration (this case doesnt allow Push config in the top) The computer works fine and i never have any problem but i was worried about that Water temp because i remember it to be under 40º with my old unit and my 5820k @4.6 that have higher temps compared to my new CPU (now i have an r7 2700 withc stock clocks). I

Corsair send me a new h115i pro because my old h110 stopped working and i think this unit is not working fine, in Idle the water temp is 29-31º degrees but when im playing or similar the water temps go to 49-50º (pump at 2100rpm and fans at 1000 rpm) the cpu temp never pass 55º gpu its at 65º and motherboards temps are between 35-40. It is normal 50 degrees on liquid?¿ i think my h110 usually stay at 35-38 at max.