Dazzzler

Okay. I swapped the fan connectors around and now they seem to respond to the changes I make in iCUE, albeit they will literally not drop below 700rpm, which isn't much of an issue really. They also react to the changes I make much, much slower than those connected to the commander pro, takes about a minute or two before they slowly change speeds. But this is a result I guess, so thank you! :]

Hey! Thanks for replying. :) As I said above, I've tried the custom curves, the fan speed does not change no matter what I do to it, it constantly runs between the 700 and 800 rpm. With the ones attached to the commander pro, I can literally turn them off by reducing the RPM low enough, whereas the ones attached to the H115i literaly do not change no matter what settings I change.

Hello, I recently built myself a new rig set up with a commander pro, LL120 and LL140 fans and the H115i platinum CPU cooler. Using iCUE I can control the fan speeds of all the fans connected to the commander pro perfectly fine with no issues, but no matter which performance state I use (quiet, balanced, extreme, custom) the fan speeds on the H115I Platinum do not change at all. I swapped out the default fans that came with the cooler with 2 x LL140's to match the rest of the fans in the case, as far as I can tell everything is connected properly in the case as I followed the instructions in the manual and have double checked it all. The H115i appears in iCUE along with the two fans and the pump controls and I can physically change the settings, it's just that nothing happens when I do and the fans typically stay around 700-800rpm. On a side note, I can conmtrol the Pump fan just fine, it's just the two radiator fans that don't change. Is there anything I'm just being silly and completely missing here? Thanks! :]