Doominq

Hello guys, I found solution for my problem. I will describe it here, maybe will be helpful for someone. First of all I loaded default settings in BIOS. Next I placed memories in slots A1 and B1. In BIOS in AUTO profile I set DRAM Voltage at 1.35, VCCIO at 1.075 and VCCSA at 1.16. This wasn't stable in 100% (sometimes doesn't boot correctly), so I've been increasing the voltages by 0.05. Finally I achieved stability with voltages: DRAM 1.37 (Motherboard shows 1.38) VCCIO 1.16 (Motherboard shows 1.18) VCCSA 1.19 (Motherboard shows 1.20) I switched profile to XMP with voltages above. No errors in Memtest, no errors in Prime95. 100% boot up ! :D

Hello Guys, I have similar issue with my pc. My config is: - I7 6700K - Asus Z170 Gaming Pro - 16GB 3000MHz Corsair Vengeance LPX - GTX 1060 X Gaming - Be quiet! 600W System Power 8 I put the memory is A2 and B2 slots. At 2133 MHz everything works fine. Problems begin at 3000 Mhz. I tried to change VCCIO and VCCSA. The computer operates stable for voltages 1.225 (VCCIO) and 1.275 (VCCS), but I'm afraid it's too much. At the lower voltage VCCIO and VCCS computer works well, no resets etc. But when I turn it off or reset sometimes I get a black screen. Do you have any ideas? Sorry for my english, I'm working on it. Cheers :D