RoninDevil

The option to select link h150i rgb: pump, is this the coolant temp option?

I have a Corsair icue link water cooler. There appears to be a bug preventing some functionality at the moment.

Am I right in thinking that what is being said is that on the custom fan section I should be setting all the fans to use ‘coolant temp’ instead of CPU package? I have the issue at the moment, which you have been giving me advice on, where a bug is not letting me use icue properly. I can’t re order the fans etc, but I also don’t have anything showing coolant temp or the ability to select it as an option. is my thinking in this correct?

I start in that screen. When I select the icue link system hub I get the screen below. Can’t do anything in there. Clicking check force update does nothing, clicking force update seems to go through the process but nothing changes, clicking x to close the update window just throws me back to the front page you have shown above and when going back to icue link hub it just shows the same again.

Thank you for taking the time to go into that great detail. I have been looking at the fan curves. I don’t have much control as icue seems to be bugged with devices stuck with a firmware window that won’t close. It’s in the icue link system hub and my vengeance pro ram, can’t alter any settings. I have set the fans at a constant 40% for the time being and things seem ok. The computer has put itself to sleep once though whilst I was playing a game. it seems something is causing an issue. I have noticed some sudden temp spikes on the amd 7800x3d, blasting up to 80 for a few seconds, which I think is why the fans revved up really loud every so often. An internet search seems to suggest that AMD chips can behave like this. I may have jumped onto icue link a bit too early. It is great in theory but without icue controlling thing properly I can’t get to the bottom of things.

Looks like waiting for an update then! in a wider note, the fan in the icue link seems to be very noisy, it’s not like a bubbling noise from trapped air or anything, just spinning noise. The case fans also periodically rev right up like a jet every so often, even at idle, and then go back down. Not sure if I have any conflicts with any ASUS software or bios that is sending the system crazy or if I can sort it all out by playing with the fan curves. I’m assuming that will be done in icue as the motherboard thinks there is only one fan, from the CPU fan header to the icue link hub. is there anything I need to look into? Any advice on how this should all work is great. I’m used to having all the fans plugged into the motherboard. This is cool but weird 😁

I wonder if it is worth reverting to an older version of icue?

Under Link System hub i just have device settings but can't select it due to the un-closable window that shows firmware v1.3.302. Checking for update does nothing, neither does force update. any attempt to close the window just throws me back to the home screen. something must be causing it. Do you have any software that came with the motherboard? my system has armoury crate on by asus.

This problem is a bit difficult to describe. I have some link fans and a link aio. I can’t control the fans or change the order, the guides say to select the link system hub and select device settings but when I select the hub the update firmware window is open, so device settings are greyed out. if I try to close the the update window by clicking the X it just goes back to the main screen and the window is back when selecting the hub again. If I click check for update nothing happens. If I click force update it goes through the process but then nothing changes and the system hub screen still has the box stuck there. if I click into settings where all of the updates are, the check updates button does nothing. It did seem to update when it was first installed. I have tried uninstalling and reinstalling but the it is just the same. I have an ASU’s rig motherboard and graphics card. has anyone come across this issue and found a fix?