will_s
-
Posts
163 -
Joined
Content Type
Forums
Gallery
Release Notes
Corsair Blog
Store
Profiles
Posts posted by will_s
-
-
No its the link cue 150i RGB without the LED which I purchased later. Now it has another problem , a fan was making a horrible noise and it turned out to be one on the 150i ( fan 3 ) . When everything is turned off the others free spin easily but this one feels seized and when turned on it doesnt work.
It took over a month before it started working correctly. Goling to start a new thread about the fan.............
-
I know about iCue have used it on and off ever since it became available when I used the Corsair water cooling kit.
I should have explained a lot better in the initial post but I was frustrated. The settings were not available in the presets.No idea why and that was the problem but now they have appeared in the presets. Was it a windows update or was it an "auto" up;date for the software?
-
I can change graphics and the murals work ok but for readouts I only have liquid temperature displayed and to be honest that is as useful as tits on a bull. I want to have it display my CPU temps and that is the only reason I purchased this bit of kit. ( had the aio but not the LCD screen ) .
So how do I go about returning it if I cant get it working?
-
Thanks
-
Have the iCueLink H150i RGB (CW-9061006-WW) and want to put the LCD screen on it. I don't want to order the wrong one so want to make sure if this is the correct one
I saw the elite and it listed part numbers and this wasn't on that list but the one above doesnt list parts so not sure.
-
Have flow from Res (XD5) to Rad to GPU and from GPU to CPU ( XC7 I think )to Rad and back to res Res
( 2 rads )
But I cant recall if for the CPU water block they have to go in a particular order ...so if the logo facing down does the input go to the right or left hole?
-
well I am worried because I have this in my system on a 2080ti
and I hate the idea of water leaking into my PC ........ so can I remove it and get a RA from Corsair"?
-
Try using an extension USB cable and having the dongle far away for the actual PC ... worked for me
-
ok, an update
Since I moved my other wireless devices and used an USB extension cable and have the transmitter on my left side I have not had any static or dropout problems
So I have my PC on the floor next to my Obutto Gaming Rig......it has the 2 dongles at the front of the Case and the mouse and keybpard are on a moveable platform/table and the Virtusso has a USB extension (actually it was the one that came with my keyboard (logitech G915 and Pro Mouse ) and that dongle is not on the left hand side....
and no static or dopouts
-
I have an extension for my wireless on my keyboard but I dont use it but will now put the wireless dongle for my headphones on this
-
ok, its not perfect had a slight bit of static and what appeared to be a few very quick cutouts........ you can just notice but not like the 3 to 4 second cutout before
-
ok, I see an updated iCue has come out and I have updated and the sound is not cutting out after 2 sessions of driving in iRacing
-
ok, I have tried it after turning both the wireless mouse and wireless keyboard off and it works flawlessly but I need the mouse and keyboard.
Now the previous wireless headset was the arctic 7 and it never had a problem but the mic is bad.
I never saw any warnings about using this with other wireless devices causing problems
-
Ok, brought these because of the good reviews for the Mic and it does a good job. But I have a bad problem in iRacing with the sound cutting out. It is working and for 1 to 3 seconds the sound can just go out and then come back on.
Now I have the dongle at the back of my PC and moved it to the front and no difference. I updated iCue (have Commander Pro ) to the latest as well as firmware.
Now I have a wireless mouse and keyboard ( gskill ).
Is this a common problem ? For a gaming headset this is a terrible problem and will return it for a refund if I cant get this fixed.
Any clues ?
-
Putting a loop in other PC and only hrydro x part will be the GPU block because I prefer them
Will be using just the Hydro GPU and was wondering how to connect it to the Commander pro? The Pro will only be used as a fan hub ( no RGB on fans ) and basically only RGB will be EK CPU and Distro Block as well as hydro x GPU
I would assume you would need some sort of extension cable. I am not up to scratch on RGB at all
-
because its set to fan and not pump
so it acts like a fan ????
-
but the primary difference is the XC7 is designed for LGA 115x/AM4 sockets, and the XC9 is for LGA 2011/2066/TR4
-
thanks but looks like due to redesign of the top part of the Dynamic 011 XL the thicker rad wont fit and with rise card wont fit in the bottom either
-
WELL THE Corsair RGB Fan LED Hub is connected to one of the LED channels on the Comander pro but that only handles 6 and you would need another RGB fan LED hub for the other 6 which looks like you have BUT then you wouldnt have GPU/CPU/Pump connection.
You can add another Commander Pro and connect them together with USB 2 but in the end you end up with lots of cables
But to just get one working...plug the rgb into the RGB fan led hub and connect that to one of the LED channels on the CP. Now they wont light up until you actually add them in the iQue software using drop down boxes.. Once you do that you should be able to do the cpu/gpu/pump but that leaves 5 fans without RGB so most probeley you will need another CP
You just have to add them in and then play around
and remember you have to connect the CP to your motherboard via USB2
-
Going to change my case and my loop. Going to add a EK-Quantum Kinetic FLT 360 D5 PWM D-RGB - Plexi pump resovoir with the XR5 and XR7 rad on bottom and top of case. Basically removing the XD5 RGB Reservoir/Pump Combo and was wondering would the temp gauge for that work in the FLT 360?
Would the pump on the FLT360 be able to coonect to the power Commander and work just the same in the software ie. control speed. I would use Manual settings for pump speed as I hate the Pump and Fan control speeds tha iCue sets
btw:the pump details are and the one is red is the important one
Pump electrical and mechanical properties:
- Motor: Electronically commuted spherical motor
- Rated voltage: 12V DC
- Power consumption: 23W
- Maximum pressure head: 3.9m
- Maximum flow: 1500L/h
- Maximum system temperature: 60°C
- Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
- Power connector: 4-Pin Molex- and 4-Pin PWM FAN connector
-
Zotac are as helful as a boil on the butt...when I asked them about the 2080ti they said ask the water block maker
anyway..learnt my lesson.....never again will I purchase a Zotac product
-
letting the pump run dry
not have all the stops on
not having paper towels
not using the bridge for fulling the system
hey...just did my one and was as nervous as hell
-
nah, doesnt work...tried the lot
so I guess I will RA it back............nah, just put it in the ignore basket and set the other 2 fans to same speed using custom mode
edit: I didnt tuen off the psu but did so when changing some plugs over and adding another SSD and on restart they are all working
-
Was wondering the same about pump speeds and have been running it 100% to get out air and I thought something was wrong....but it works and I see a lot of little bubbles in the GPU block :-) To be honest I am very surprised that I cant hear the pump after reading comments about pump whine
With coolant at 31C the pump runs about 2100rpm (48%) ..this is idle with a room temp of 26C
Fan seized on iCue Link 150i RGB
in Build Hardware Troubleshooting
Posted · Edited by will_s
Only just over a moth since I purchased this. A fan started making a horrible noise and when I removed the glass panel I was able to find out it was the one on the 150i. Its the one at the end ( further-est from the tubes ). When turned off the others free spin easily but this one doesn't and not when running it just doesnt turn at all.
Replacing the fan will mean removing the whole unit and need more thermal paste when I put it back on. Have 6 more I purchased separately ( 6 in 3 out ) .
Its only just over a month since I brought it...a new fan shouldn't do this . No error on my behalf as the fans came already preinstalled on the unit
edit: just had a look and it was delivered on 30th April along with CORSAIR iCUE Link QX120 RGB 120mm Magnetic Dome RGB Fans - Triple Fan Starter Kit with iCUE Link System Hub - White