joejoe69 Posted August 6, 2012 Share Posted August 6, 2012 My last build comprised of an Intel Bad Axe mobo w/QX6700 @ 3.4GHz, 1333MHz DDR2 ram, and HD 6870s in CrossfireX so this is definitely a good upgrade from where I came from. It'll be used for gaming, daily use, video transcoding, and some moderate photo editing. Aaaand perhaps of course, lots of staring at. I eventually went from a closed loop water cooling solution to a full blown custom loop, as you can see below. Enjoy watching it unfold!! http://i183.photobucket.com/albums/x237/joejoe69_album/IMG_20121205_152945.jpg Video link: Final configurationhttp://i183.photobucket.com/albums/x237/joejoe69_album/IMG_1049_zpsa4e94057.jpghttp://i183.photobucket.com/albums/x237/joejoe69_album/IMG_1040_zpsb42d4233.jpghttp://i183.photobucket.com/albums/x237/joejoe69_album/IMG_1050_zpsd46f6a82.jpghttp://i183.photobucket.com/albums/x237/joejoe69_album/IMG_1118_zps44a28704.jpg Final CPU overclock validated by CPUIDhttp://i183.photobucket.com/albums/x237/joejoe69_album/CPUID3770K47GHzValidation2_zps35f9f095.png Temps from overclock (30C ambient temps with side panel installed)http://i183.photobucket.com/albums/x237/joejoe69_album/SwiftechMCP65547GHz1336V_zpsc68a1955.png Memory & cache performancehttp://i183.photobucket.com/albums/x237/joejoe69_album/AIDA64CacheampMemoryBenchmark47GHz_zps3ac11dba.png Final GPU performancehttp://i183.photobucket.com/albums/x237/joejoe69_album/MSIKombustorWayPlane_zpsb8f25a1c.pnghttp://i183.photobucket.com/albums/x237/joejoe69_album/MSIKombustorKMarkPhysx_zpsd390e9d0.png Unigine Heaven 3.0 (default settings)http://i183.photobucket.com/albums/x237/joejoe69_album/UnigineHeavenDefault_zps3cd44ddf.png Unigine Heaven 3.0 (max settings)http://i183.photobucket.com/albums/x237/joejoe69_album/UnigineHeavenMax_zps928ae665.png Final Windows Experience Index (WEI)http://i183.photobucket.com/albums/x237/joejoe69_album/WEI_zpsaddb4d84.png The build starts here... Meet the family.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-01_12-37-05_16.jpg Speed talks.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-01_12-40-00_264.jpg Samsung Bluray optical drive popped in.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-01_12-44-43_145.jpg Boot and storage drive installed in the racks.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-01_12-49-06_642.jpg Maximizing fan size with the AF140 Quiet Edition, I/O shield in.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-01_12-52-09_661.jpg Bolting this on before dropping the motherboard in. Built-in Wi-Fi and Bluetooth is always a plus!!http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-01_12-54-18_241.jpg The brain.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-01_12-59-59_948.jpg Vengeance 16GB locked in.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-01_13-04-51_803.jpg Inside the case.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-01_13-14-14_895.jpg Pre-installed AF120 Quiet Editions behind the drive cages for extra cooling for the GTX670.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-01_13-15-31_142.jpg GS800 is from my previous build and is more than enough to power my rig. It has a lit fan so I'm mounting it with the fan facing up. http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-02_12-06-55_818.jpg Corsair H100 with SP120 Quiet Editions. That Intel fan can be thrown at the faces of people you don't like.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-02_12-14-25_897.jpg The rad mounted on top.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-02_12-23-39_5.jpg Fans screwed under the rad for a push setup to exhaust up.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-02_12-53-14_479.jpg GTX 670 Windforce for quietness and ability for OC'ing.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-02_13-00-19_998.jpg GPU, wires, plugs, cables all connected.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-02_13-17-33_902.jpg The usual rats nest in the back.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-02_13-19-08_493.jpg 15 minutes later...http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-09_00-18-01_384.jpg The reason I chose this particular Carbide case was for having a non-modular PSU to start with. Notice how the extra unused cables bulge out, much like the cowled back panel.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-09_00-20-23_366.jpg Everything fits behind there with no flex or resistance in the panel.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-03_02-54-27_527.jpg Turned on for the first time.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-03_09-48-55_680.jpg Lights off.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-03_09-50-56_626.jpg Close up. The H100 pump was fairly loud as expected. So I did the 1N4001 diode mod and fixed the problem. It's so quiet, the PSU (while already quiet), currently has the loudest fan in there now, lol.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-03_09-56-58_279.jpg POST successful. Now on to other matters before OS install.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-03_09-59-46_186.jpg I added some blue automotive wire loom on the H100 corrugated lines to match up with the overall blue theme. Also stuck another LED strip behind the opposite side of the H100.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-09_00-26-36_339.jpg As much as I love this case, the mesh window panel bothers me alot. I'm all for extra cooling but there's no filter to prevent dust accumulation. There's nothing more rewarding than to show pride in my build through a clear window.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-03_03-07-41_239.jpg After removing the dreaded mesh window by hand...http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-09_00-30-48_130.jpg ...I trimmed the panel's interior tabs and raised trim to allow the acrylic to sit flat. Some 3M Extreme double sided tape then held it down nicely. You can't really see the clear window, but it's there lol.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-09_00-30-18_623.jpg Clear window side panel installed. The way Corsair should've done it...http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-05_23-42-49_730.jpg Lights off again...http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-05_23-43-56_287.jpg Inside with all the blue. http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-09_00-59-45_639.jpg The H100 all nestled up between the heat sinks and RAM.http://i183.photobucket.com/albums/x237/joejoe69_album/afterfocus_1344516242429.jpg Vengeance RAMhttp://i183.photobucket.com/albums/x237/joejoe69_album/afterfocus_1344515114099-1.jpg Gigabyte GTX 670 idling cool at 34C.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-09_01-03-16_563.jpg The GS800 helps with the interior lighting while powering up the system.http://i183.photobucket.com/albums/x237/joejoe69_album/afterfocus_1344516404538.jpg Configuring the BIOS for getting it up and running.http://i183.photobucket.com/albums/x237/joejoe69_album/afterfocus_1344202718616.jpg I'm impressed with this setup. This is the default configuration without overclocking. I'm pretty sure to max the WEI with no problems going from 3.5GHz to over 4GHz.http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-05_23-30-02_703.jpg What a sexy piece of technology...http://i183.photobucket.com/albums/x237/joejoe69_album/afterfocus_1344484255790.jpg Link to comment Share on other sites More sharing options...
stratosrally Posted August 6, 2012 Share Posted August 6, 2012 Really nicely done. Clean wiring job and excellent color-coordination! The window is the crowning touch... Which part number is the Samsung BluRay? I have the identical one except the whole front is gloss - even the black surround. I'd prefer to have the matte surround for my next build. Might have to just mask off and paint my existing one, though... Link to comment Share on other sites More sharing options...
joejoe69 Posted August 6, 2012 Author Share Posted August 6, 2012 Thanks!! The Samsung drive is model number SH B123L/BSBP. I personally like the mirror look of just the drive tray cover. I don't see how the highest of the Carbide series cases does not have a clear window option, but the lowest 300R does. Link to comment Share on other sites More sharing options...
stratosrally Posted August 7, 2012 Share Posted August 7, 2012 No, no, no - Thank YOU! :D: I think my Sammy is the SH-B083L. Being all glossy keeps it from looking good in modern matte finish cases. Works good, though. Depending on what case I go with next I may try "Stealthing" the drive. Link to comment Share on other sites More sharing options...
dezignah Posted August 7, 2012 Share Posted August 7, 2012 Looks great! Very tidy, good cable management and a colour scheme that works well. So jealous right now >:( Link to comment Share on other sites More sharing options...
joejoe69 Posted August 7, 2012 Author Share Posted August 7, 2012 Being all glossy keeps it from looking good in modern matte finish cases. Works good, though. Depending on what case I go with next I may try "Stealthing" the drive. I hear you. I already stealthed the wife's optical drive as an experiment, after watching TinkerTechPC's vid Youtube. She flipped out when she saw nothing but 5.25" bay covers in the front and no optical. Looks great! Very tidy, good cable management and a colour scheme that works well. So jealous right now >:( Thanks!! Link to comment Share on other sites More sharing options...
joejoe69 Posted August 14, 2012 Author Share Posted August 14, 2012 Swapped the stock Corsair front white LED fans for some Bitfenix goodness. They have very focused airflow (as seen in TastyPCTV's smoke test on Youtube) compared to the regular fans, and are very quiet. Under the Bluray drive, you can barely see the 3rd AF120 fan behind the three 5.25" bay slots. http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-14_11-34-04_12.jpg Up close. As like any other LED fan ,they dim or brighten as loads change, which I think is cool. http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-14_11-34-32_423.jpg I like the overall look... http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-14_11-33-45_720.jpg Overclocking time... http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-14_11-38-10_900.jpg 4.4GHz at 1.2V (1.275V actual in BIOS). So far temps and stability are good. I know Ivy Bridge tends to be hotter than Sandy Bridge. But clock for clock, Ivy still wins in my opinion. I'll see when I get back from work... http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-14_11-45-12_607.jpg Link to comment Share on other sites More sharing options...
HOODedAssault Posted August 15, 2012 Share Posted August 15, 2012 Push it ! Anything less than 4.6ghz is unsatisfactory lol. Should've got a reference card tho. Non reference card made my h100 pushing out of case almost 10° hotter in a haf 932. Nice setup tho. Link to comment Share on other sites More sharing options...
joejoe69 Posted August 15, 2012 Author Share Posted August 15, 2012 Haha I know. 4.6GHz is actually my target OC. I have about an hour and a half before this 24hr OC is done. I'm seeing good results so far, however voltages could be pulled back a bit to save a little heat. My peak temp was 81 from Core #2 but that was like when it first entered 100% load. Right now I'm averaging temps in the mid 60s all across. Not bad for using Quiet Edition fans with a slightly slower fan speed to trade off pump noise with the diode mod. I also have a pair of SP120 Performance Edition fans on their way to see how much more of a temp drop and OC headroom I can get, with a small trade off for slightly higher dB. As for my GPU, it stayed 34C the whole time during the stress test so I don't think it makes a difference at all. I have the dual AF120s pushing it's heat out to the back on the bottom half of the case. The upper half, where the CPU and power delivery is, is still cool tbh. Thanks for your inputs. 4.6GHz it is... Link to comment Share on other sites More sharing options...
joejoe69 Posted August 16, 2012 Author Share Posted August 16, 2012 Current 4.5GHz stress test. Temps seem stable in mid 60s range @ 1.175V with offset voltage of +0.085V (1.26V @100% load). My plan of attack in OCing the 3770K is running the Windows Experience Index assessment before running Aida64 (my preferred program) for hours. Normally, an unstable OC would fail the assessment during the CPU performance part @ 80-90% load. I would then go back to the UEFI or AI Suite II and make adjustments accordingly. That way I don't waste time stressing the CPU overnight and wake up to a password login screen in the morning. http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-11_22-27-58_34.jpg Link to comment Share on other sites More sharing options...
HOODedAssault Posted August 16, 2012 Share Posted August 16, 2012 It makes a difference. Only slightly when stress testing tho. Less than 5° on CPU. But what heat it does put out is still coming off the gpu hs and up into ur h100. While gaming tho is what made the 10° diff for me. Link to comment Share on other sites More sharing options...
joejoe69 Posted August 16, 2012 Author Share Posted August 16, 2012 I have a 3rd AF120 pushing air across the GPU PCB and straight back, directly towards the AF140 exhaust fan. During gaming, I get around 56°C peak on most games with both the CPU and GPU consistently. The cooling capacity of this case is outstanding. Now if I was to install a floor fan next to the PSU, it would interrupt the already efficient front-to-back airflow and cause the GPU exhaust flow rise up instead of flow rearward like it already does now with the dual AF120s blowing on it from the front. On a side note, my memory calculations rating jumped up to 7.9 in my Windows Experience Index, leaving the CPU with only score of 7.8. I think 4.7GHz might be the final OC if I can get 4.6GHz stabilized easily. This is so much like feeding boost to a turbocharged engine. You'll get so hooked that you just don't know when to say, "when", lol. At the end of the day, all this OC'ing pays off and is definitely rewarding. Link to comment Share on other sites More sharing options...
HOODedAssault Posted August 17, 2012 Share Posted August 17, 2012 I'd go 1.35v get as high as u can then call it a day lol that's how I roll. Link to comment Share on other sites More sharing options...
joejoe69 Posted August 17, 2012 Author Share Posted August 17, 2012 Gotcha. These Ivy's are totally different beasts from Sandy's. I've read Intel used cheap thermal paste instead of fluxless solder to bind the heat spreader on the die. Link to comment Share on other sites More sharing options...
HOODedAssault Posted August 17, 2012 Share Posted August 17, 2012 Your gpu will make a lot less difference for ur CPU temps as well since u have hyperthreading. Made a lot larger difference for me as I was working with 2 7950s on a 4.7 2500k so the CPU was loaded pretty high. Ur CPU will stay low in games because of the ht. Well in bf3 and others that support ht. It will stay cool in other games because ur only on 1 gpu. CPU load goes up a lot when running 2+ gpu's. Should've seen how hot my i7 930 got at 4.2ghz running tri sli 470s. Was slightly hotter then prime95/linx temps while gaming cuz of the heat from the gpu's. And they were reference lol. Link to comment Share on other sites More sharing options...
joejoe69 Posted August 17, 2012 Author Share Posted August 17, 2012 The other reason I didn't settle for reference GPU's was because of noise, as I have become a quiet freak as well. I've always believed in the design of reference GPU's being more efficient than non-reference GPU's as far as front-to-back heat extraction goes. But once it heats up really good, they just scream. I myself had SLI/CrossfireX configs (9800GTX's and HD 6970's) and I've always ended up swapping out their coolers for Arctic Cooling Accelero twin or triple fan setups to combat noise. I chose the Gigabyte GTX 670 because it had the same design coolers the Arctic Cooling Accelero's had and they were clocked higher than reference. It won't be long until I eventually add another one and we'll see how the 500R handles heat with two of those bad boys and a 4.7GHz OC. Link to comment Share on other sites More sharing options...
CharityCase Posted August 18, 2012 Share Posted August 18, 2012 I will do a similar build soon . . wondered how you would connect case firewire to MB? (Any specific PCIe card recommendations etc) Would you share the memory module ID numbers, do you think CMZ16GX3M4X1866C9R would be any better. Link to comment Share on other sites More sharing options...
joejoe69 Posted August 18, 2012 Author Share Posted August 18, 2012 My particular ASUS motherboard has no onboard 1394 ports so it's evident that a PCIe slot has to be used for it. As for my DIMMs, they are CMZ16GX3M4A1600C9B. The 1600MHz DIMMs have slightly tighter timings than the 1866MHz variants (9-9-9-24 vs 9-10-9-27 respectively) so they suit me better for gaming. When compared head-to-head in gaming, there is little to no difference between 1600 to 1866, other than 3DMark11 benchmarks and so forth, for example. As said, this rig is mostly for gaming, daily use, and moderate video editing. Upgrading from 1600MHz to 1866MHz for me would pretty much be worthless at this point. Have fun on your build!! ;) Link to comment Share on other sites More sharing options...
joejoe69 Posted August 19, 2012 Author Share Posted August 19, 2012 Okay, so this is far as it gets overclocking my 3770K. 4.5GHz @ 1.16V with a 0.75V offset in UEFI, adding up to the voltage you see there. I've gone up to every speed above 4.5GHz, all they way up to 4.8GHz @ 1.325V-1.35V but the temps were too unbearable. All my settings were done with auto/offset voltage and a medium to high LLC setting. I also switched to High Performance SP120's on my H100 and it somehow made it worse, lol!! So back went the Quiet Editions. My Malay batched 3770K may be the culprit as I've seen Costa Rica batched 3770K's OC better... Anyway, at 4.5GHz, I'm more than happy. Anything higher is just an achievement number to me. Don't get me wrong, I will still try but for now, I still get great FPS' in maxed out gaming. http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-19_12-43-20_722.jpg Link to comment Share on other sites More sharing options...
Exodist Posted August 23, 2012 Share Posted August 23, 2012 Nice looking system. Very well done. :-) Link to comment Share on other sites More sharing options...
joejoe69 Posted August 24, 2012 Author Share Posted August 24, 2012 I went ahead and bought another 3770K. This time, it's from Costa Rica like I hoped for. I found Malay units to be a little hotter than their Costa Rican counterparts. Let's see how they fare against each other with heat and stability, or is it just me... http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-22_23-54-20_223.jpg http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-22_23-54-39_754.jpg http://i183.photobucket.com/albums/x237/joejoe69_album/3770K.jpg It's almost an unfair comparison now because I have a push/pull configuration with my H100 and 4x SP120 Quiet Edition fans. All I did was shift the radiator and fans toward the right side of the case. A 500R first!! http://i183.photobucket.com/albums/x237/joejoe69_album/PushPull_1.jpg Clears RAM and VRM heatsinks on an ASUS P8Z77 motherboard. http://i183.photobucket.com/albums/x237/joejoe69_album/PushPull_2.jpg RAM can still be easily accessed, as well as the 8-pin EPS connector. http://i183.photobucket.com/albums/x237/joejoe69_album/PushPull_4.jpg Sorry for the bad lighting. I'll get her up and running an post some results when I can. http://i183.photobucket.com/albums/x237/joejoe69_album/PushPull_3.jpg Link to comment Share on other sites More sharing options...
joejoe69 Posted August 26, 2012 Author Share Posted August 26, 2012 After countless reconfigurations with the H100 and SP120 Quiet Edition/Performance Edition fans, I found that the best setup was as simple as placing the fans on top for intake, like Corsair suggested. Push/pull with the 4x Quiet Editions didn't do squat except create more noise and dropped temps to a mere 2°C average. Not worth it. The High Performance Editions again, made it more hotter. Don't know why. Then finally, top intake setup with the Quiet Editions dropped my temps at an average range of 5-8°C. My GTX 670 temps remained the same @ 36°C. http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-25_15-03-36_942.jpg http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-25_15-07-43_65.jpg At 4.6GHz with 1.25V on the Costa Rican 3770K, I am running a higher processor speed at lower voltages and temps than I was at 4.5GHz with 1.264V on the Malaysian 3770K. See the comparisons: 4.5GHz @ 1.264V / Malay 3770K / Core Temps: 71-72-75-83 http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-19_12-43-20_722.jpg 4.6GHz @ 1.25V / Costa Rica 3770K / Core Temps: 62-72-66-67 (8 hours done, 16 more to go) http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-25_22-21-59_264.jpg The Costa Rica CPU spiked to 90s at the 1min 30sec mark in the beginning of the stress test, then stabilized to its current 60-70's average as time went on. The Malay CPU saw more random hot spikes to 90s during it's test at 4.5GHz. 4.6GHz with the Malay 3770K was very difficult to achieve even though I successfully validated a stable but still hot overclock at 4.5GHz. Is it still me, or are Costa Rica 3770K's still cooler than Malay 3770K's? Link to comment Share on other sites More sharing options...
joejoe69 Posted August 26, 2012 Author Share Posted August 26, 2012 CMXAF2 RAM fan undervolted to 7V. Quiet while also providing some "impinging airflow" to my precious 16GB 1600MHz RAM. http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-25_15-01-20_448.jpg http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-25_15-01-49_359.jpg Never showed you this side of the case: 3x AF120 Quiet Editions, efficiently cooling and blowing away heat from from front to back. http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-25_15-02-11_232.jpg Link to comment Share on other sites More sharing options...
joejoe69 Posted August 27, 2012 Author Share Posted August 27, 2012 Here's my 24 hour overclock @ 4.6GHz with 1.25V and average of 74°C temps, and with a recorded current average temp at the time of 69.25°C. http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-26_14-22-54_179.jpg Link to comment Share on other sites More sharing options...
joejoe69 Posted August 27, 2012 Author Share Posted August 27, 2012 I've come a long way from OC'ing with Phoenix Award BIOS' on Pentiums and Core 2 Quad Extreme's, lol. Here are my settings in the ASUS UEFI: The latest BIOS flash of 1401 for my particular P8Z77-V Deluxe motherboard. http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-27_10-02-22_469.jpg As you can see, 4600MHz (4.6GHz) is achieved with the default BCLK and an all core ratio of 46. An XMP profile switches my default RAM speed of 1333 MHz to 1600MHz. For this overclock, everything else you see is just as I left it. http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-27_10-02-55_444.jpg Scrolling down, XMP profile shows DDR3 1600MHz automatically with other relative RAM settings automatically adjusted. Voltage is set default at 1.15V with a "+" offset of 0.135V, giving it a 1.28V value under load. http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-27_10-03-34_542.jpg Everything else below is defaulted. http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-27_10-03-56_419.jpg On the DIGI+ Power Control Screen, I have my LLC set to Medium, which gave me a slight droop to 1.25V from the UEFI 1.28V value. CPU Power Phase Control was set to Optimized and CPU Current Capability has been automatically set to 140% for 4.6GHz. Again, everything else untouched and defaulted. http://i183.photobucket.com/albums/x237/joejoe69_album/2012-08-27_10-04-16_458.jpg EIST, C states, and Turbo (required for overclock) were left enabled to achieve my 4.6GHz overclock. Back then on Pentiums and Core 2's, these were all disabled to achieve a stable overclock. I found that it made no difference with it off this time around and it helps with CPU/voltage efficiency. That's it!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.