dnoam Posted February 13, 2012 Share Posted February 13, 2012 Hi. installed today the H100 and my computer is booting again and again after short time like if the cpu is getting over heated, as i am in instalation and a new built i have no way to know what is the cpu temprature, i do not hear the pump working but the fan light is on and active , is there a way to finf out if that thing is actually working? Link to comment Share on other sites More sharing options...
Dubb Posted February 13, 2012 Share Posted February 13, 2012 Go into bios and check the temperature. You could also download CPUID hardware monitor to watch temperatures in windows. Link to comment Share on other sites More sharing options...
dnoam Posted February 13, 2012 Author Share Posted February 13, 2012 Thanks for the repond , but i cannot get into bios as it is the 1st boot and it shuts down very quicly. Link to comment Share on other sites More sharing options...
dnoam Posted February 13, 2012 Author Share Posted February 13, 2012 just menage to prolong it a bit i got 80c cpu temprature and it is for sure too hot , i guess th pump is useless. Link to comment Share on other sites More sharing options...
dnoam Posted February 13, 2012 Author Share Posted February 13, 2012 any help guys how to check if the pump is working , temprature is causing my system to boot after very sh time ? Thanks Link to comment Share on other sites More sharing options...
wlw_wl Posted February 14, 2012 Share Posted February 14, 2012 Have you connected it properly? The Molex connector on the H100 is really low quality, make sure none of the pins have retracted and that they have good contact. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.