izz0414 Posted November 1, 2011 Share Posted November 1, 2011 I am doing a new rig and nailed my case down to these 2. I want to be able to install the XSPC RASA 750 RS240 inside the case. The carbide is cheaper but I think the rad is too big to close the lid? The obsidian on the other hand is more expensive but I think can have a much cleaner installation. Any feedback would be greatly appreciated! Thanks! Link to comment Share on other sites More sharing options...
Anth0789 Posted November 1, 2011 Share Posted November 1, 2011 Id recommend the 650D since you have water cooling setup it would fit perfectly. Link to comment Share on other sites More sharing options...
izz0414 Posted November 1, 2011 Author Share Posted November 1, 2011 The 650D is definitely favored, but I can't find any place with free shipping. Shipping to Hawaii costs an arm and an leg. >__>. Link to comment Share on other sites More sharing options...
tomato16 Posted November 3, 2011 Share Posted November 3, 2011 I have a 650D but I've been thinking about replacing it with a 500R for the following reasons. 500R 2x120mm intake fans (I prefer this to the 650D's single 200mm fan)includes mesh panel for side intake fansUSB ports are more accessiblebottom 120mm intake fan Link to comment Share on other sites More sharing options...
Kuni Xela Posted November 9, 2011 Share Posted November 9, 2011 XSPC Rasa 750 RS240 radiator Dimensions: 121x35x397mm (WxDxH) It will not fit under the top mesh of the 500r, since the depth is 35mm without the lid installed and the total lenght under the lid is also less than 370mm (and you need 397mm) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.