Fawlty Posted January 10, 2011 Share Posted January 10, 2011 Going to put together another system using the H50 push pull configuration. I used Scythe S-FLEX SFF21E's on my last build but this time being I have 2 of these corsair fans I figured I should put them to work. With the Scythe fans I wired them directly to a molex connection. Using the 2 corsair fans I was planning on using a pwm splitter and connecting them to the MB's CPU header. Has there been any problems setting this up this way, I'm a bit concerned about the amount of current going through a header designed for one fan. This MB is a Gigabyte GA-EP45T-USB3P It's a quad I use for "Rise OF Flight" dedicated server/backup computer. Cheers Fawlty Link to comment Share on other sites More sharing options...
Fawlty Posted January 10, 2011 Author Share Posted January 10, 2011 Decided to get creative and wire them up to a molex connector, rather play it safe. Cheers Fawlty Link to comment Share on other sites More sharing options...
Mr. Cool Posted January 19, 2011 Share Posted January 19, 2011 check this out at Akasa: Silent Smart PWM cable for 2 PWM case fans and cooler(S021697) might be more suitable for you Link to comment Share on other sites More sharing options...
jmrios82 Posted January 21, 2011 Share Posted January 21, 2011 I have 2 Cooler master blade master hooked to my mb cpu fan, with a PWM splitter, I have them running for month with no issues at all. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.