Jump to content
Corsair Community

floppy error 40


Devils-Blood

Recommended Posts

Hi

 

I have a HX620UK and when I connect the floppy I get a error 40. I know this is to do with the power supply. All other power supplies I have had use a 4 pin connector only connected to the floppy.

 

Is it worth only having the floppy off 1 of the 12v rails with nothing else off that rail.

 

Or is the PSU faulty.

 

Advice gratefully received

Link to comment
Share on other sites

  • Corsair Employees
Hi

 

I have a HX620UK and when I connect the floppy I get a error 40. I know this is to do with the power supply. All other power supplies I have had use a 4 pin connector only connected to the floppy.

 

Is it worth only having the floppy off 1 of the 12v rails with nothing else off that rail.

 

Or is the PSU faulty.

 

Advice gratefully received

 

The adapter works fine on the floppy drives I have here in the lab, have you tried the other side of the cable to make sure it's plugged in correctly? Or changed the floppy cable with another?

 

The floppy cable DOES work through the PSU, though, it's not a flaw by design.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...