waming Posted October 15, 2005 Share Posted October 15, 2005 I have the asus p4c800-e deluxe MB with a pentium 2.4 overclocked to 3.2 GHZ. I previosuly had it running on the value select 1 GB (2 sticks) of memory nad it worked fine. This evening i put in the twin1024-4000C25 memory and it wont boot at all. It turns on and all the lights work (reading the cd-rom, hard drive etc..) but nothing is booting. There are no beeps...etc Can someone please help? Thanks Link to comment Share on other sites More sharing options...
barry6743 Posted October 15, 2005 Share Posted October 15, 2005 If you haven't yet done so, try clearing your CMOS and starting over with your OC'ing. Link to comment Share on other sites More sharing options...
waming Posted October 15, 2005 Author Share Posted October 15, 2005 Excuse my lack of knowledge, how does one clear the CMOS? Thanks Link to comment Share on other sites More sharing options...
leeghoofd Posted October 15, 2005 Share Posted October 15, 2005 Pull the power cord out of the PSU, look into your mobo booklet for the CMOS reset jumper : short circuit it via the jumper as mentioned in the manual, reseat it to original position, put back in the power cord and restart the rig. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.