Ultrawide + Standard Monitor

[jl94x4]

So I have 2 monitors, one is a 3440x1440 and the other one is a 2560x1440.

 

I have purchased

 

Corsair iCUE LS100 Smart Lighting Strip Starter Kit x2

 

Corsair iCUE LS100 Smart Lighting Strip Expansion Kit - 350mm x2

 

How would I get this working, or would I have to set it up as individual monitors? I would prefer to have them daisy chained, but I have no idea how it would work as the ultra wide would need 2x 450mm 2x 250mm and 2x 350mm just for the one monitor.

 

Thanks for any help.

[Corsair Angie]

So I have 2 monitors, one is a 3440x1440 and the other one is a 2560x1440.

 

I have purchased

 

Corsair iCUE LS100 Smart Lighting Strip Starter Kit x2

 

Corsair iCUE LS100 Smart Lighting Strip Expansion Kit - 350mm x2

 

How would I get this working, or would I have to set it up as individual monitors? I would prefer to have them daisy chained, but I have no idea how it would work as the ultra wide would need 2x 450mm 2x 250mm and 2x 350mm just for the one monitor.

 

Thanks for any help.

 

Hey there, sorry I didn't get to this sooner.

 

The lighting strips can be daisy-chained. Keep in mind the max RGB LEDs for the starter kit's controller (138 LEDs for 1 channel or Max. 192 LEDs for 2 channels). Each starter kit sums to a total of 84 LEDs. 350mm expansion strips have 21 LEDs. So you can run a starter kit and two 350mm expansion strips on one channel = 132 LEDs. The other starter kit would have to be run on the second channel. Another way is to have 1 starter kit on the smaller monitor and the rest on the ultrawide.

 

Hope this helps.