H100i Not recognized by Windows 10

[Grozagaming]

After upgrading my mobo/cpu/ram and fresh W10 reinstall Windows wont recognize H100i. Fans spinning, pump vibrating, LED working. Cant see it in Link, cant see it (?) in device manager. Can see CPU FAN in bios. Mode set to voltage.

 

Its correctly connected, tried different USB slots. Used to work fine on previous mobo. Device manager gives "no driver installed". Screenshots are in the other thread regarding LINK, but still touches same problem.

 

http://forum.corsair.com/v3/showthread.php?t=183314

 

Tried installing different LINK builds from v2 to the latest one, nothing worked.

 

What should I do? Any link for this specific driver? Or this issue is hardware related?

[Corsair Jam]

After upgrading my mobo/cpu/ram and fresh W10 reinstall Windows wont recognize H100i. Fans spinning, pump vibrating, LED working. Cant see it in Link, cant see it (?) in device manager. Can see CPU FAN in bios. Mode set to voltage.

 

Its correctly connected, tried different USB slots. Used to work fine on previous mobo. Device manager gives "no driver installed". Screenshots are in the other thread regarding LINK, but still touches same problem.

 

http://forum.corsair.com/v3/showthread.php?t=183314

 

Tried installing different LINK builds from v2 to the latest one, nothing worked.

 

What should I do? Any link for this specific driver? Or this issue is hardware related?

 

Hello, as Devbiker mention in the other thread, CLink 4 isn't supported with the latest Processors. Do you have a Corsair Keyboard? If so, which one? It may be supported with iCue. I would download it and give it a try. iCue - Download. See if this helps.

[Grozagaming]

Hey, thank you for your reply. I did download it and tried different versions of it.

 

No, I dont have another corsair product (except RAM and PSU but its not connected with a USB to mobo). So that thing in device manager has to be it.

Edited December 11, 2018 by Grozagaming