Jump to content
Corsair Community

CMR32GX4M4C3000C15 on Asus Zenith Extreme x399 AMD Threadripper 1950x


SilentStorm
 Share

Recommended Posts

Currently, I'm using Asus X399 Zenith Extreme with AMD 1950x. I can't seem to use the docp profile 3000mhz 15,17,17,35 1.35v (when enable it is actually at 3003mhz because the BCLK is set at 102.4) . It will fail to boot. I'm using the latest bios 0701. I have check the QVL and the cmr32gx4m4c3000c15 is on the list. When the profile is enable the timing auto change to as follow: CAS 15, RAS# to CAS# Read delay 17, RAS# to CAS# Write Delay 17, RAS# PRE time 17, RAS# ACT time 35. Voltage DRAM AB 1.35v and DRAM CD 1.35v. Can anyone help me with this? It can run at 2800mhz but any higher frequency, it won't boot. Edited by SilentStorm
Link to comment
Share on other sites

  • 2 weeks later...

I've got the same problem, did you ever sove this?

 

Currently, I'm using Asus X399 Zenith Extreme with AMD 1950x. I can't seem to use the docp profile 3000mhz 15,17,17,35 1.35v (when enable it is actually at 3003mhz because the BCLK is set at 102.4) . It will fail to boot. I'm using the latest bios 0701. I have check the QVL and the cmr32gx4m4c3000c15 is on the list. When the profile is enable the timing auto change to as follow: CAS 15, RAS# to CAS# Read delay 17, RAS# to CAS# Write Delay 17, RAS# PRE time 17, RAS# ACT time 35. Voltage DRAM AB 1.35v and DRAM CD 1.35v. Can anyone help me with this? It can run at 2800mhz but any higher frequency, it won't boot.
Link to comment
Share on other sites

  • 1 month later...
 Share

×
×
  • Create New...