adiphenomenon Posted October 6, 2016 Share Posted October 6, 2016 Hello guys, Welcome to my 1st Thread :biggrin: This is my first build and my first mod to join a case mod competition in Indonesia. My build is pretty budget-based build because most of my PC parts are from second hand and it's take 2 years for me to build this PC to get all parts fit with my desire. This is a casemod competition with a sticker cutting themed "Batik". As you know, batik is the Indonesian characteristics. My mod is called "Seven Thirty" because I took 730 days to build my RIGs and as a college student I have to wake up in the morning at 7.30 AM lol :D: . This event were held by PT. Alfa Artha Andhaya, main distributor for MSI Product in Indonesia, so I added their logo's and a dragon keychain (actually who is sitting down above the PSU Cover is a keychain :D: ). So, here is my worklog and several final pics. Sorry I don't have any better camera :( So, at the first week, I start to clean my lovely case Carbide 330R out from any other stickers and dust. Raw Case :D I need to re-manage cable for the front panel because it's doesn't seem neat and clean, so I decided to open the front panel and tie down the cables. At the second week, I planned to setup the lighting, painting the HSF, make the SSD hanger, and make a cover for the cable management holes (It's unfortunate that my carbide 330R cable holes not equipped by a rubber). Lighting Setup Here I used a Black Flat Pylox, I only use 1 bottle and it's about a 1/4 remaining when I finished my mod. Before, I have mention that I want to use this two things, but in final mod I realize that the cable management cover is too ugly to be applied in my RIGs, and for the SSD hanger, I didn't get the 90 degree SATA Connector :[pouts: . So I decided to put it back to the default condition. For the last day, I only applying the stickers and finishing the cable management. To get a good cable management is very hard, so I decided to buy a PSU Cover for my case because I caught by a deadline so I can't make it by myself. Here is the final picts of my case mod :biggrin: My Specs: Mobo: ASUS Maximus VI Formula Proc: Intel Pentium G3258 Anniversary Edition Mem: Corsair Vengeance 2x2Gb PC12800 VGA: MSI GTX 970 HDD #1: Seagate 80Gb SSD #1: Adata SP900 SSD 128Gb SATA III Case: Corsair Carbide 330R Titanium Edition PSU: Seasonic M12ii-620w Bronze Monitor: Samsung SA300 19" Monitor OS: Windows 7 64bit That's all from me, if you have any suggestion for me, I very appreciate you and consider it for my next mod :biggrin: And if you like this mod, you can give likes to my album on facebook here https://www.facebook.com/iTechnophile/photos/?tab=album&album_id=1181245688581484 Thank you ! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.