RJ1962 Posted February 18, 2016 Share Posted February 18, 2016 Hi All, I installed this power supply in my son`s computer yesterday and noticed that it was only supplied with 4x6+2 pigtailed cables. I was going to use this PSU in my Skylake build with Titan X in Sli but I wondering if these pigtailed cables will handle the power. I was to believe that with high end GPU`s you should always use 2 X 6+2 cables to the connectors. I have seen on some YT Videos that they also run the pigtailed cables for high end GPU`s so it would be good if someone on here could clarify this. Thanks. Link to comment Share on other sites More sharing options...
red-ray Posted February 18, 2016 Share Posted February 18, 2016 I was to believe that with high end GPU`s you should always use 2 X 6+2 cables to the connectors. I expect you should use two cables per GPU, four in total for the reason I stated in http://forum.corsair.com/forums/showthread.php?p=837316 Link to comment Share on other sites More sharing options...
RJ1962 Posted February 18, 2016 Author Share Posted February 18, 2016 I expect you should use two cables per GPU, four in total for the reason I stated in http://forum.corsair.com/forums/showthread.php?p=837316 Thanks for the reply Red Ray,I will probably use cable extensions to make it look neater. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.