kcuestag Posted February 16, 2016 Share Posted February 16, 2016 Hello, First of all, let me say that this is on a clean Windows 10 PRO install I did just a few hours ago... I downloaded latest version (CL4) and it will not detect my H110i GT or the fans. What's going on here? :confused: Link to comment Share on other sites More sharing options...
red-ray Posted February 16, 2016 Share Posted February 16, 2016 What's going on here? :confused: From what you have said I can't even guess The SIV [uSB Bus], [Link Devices] and [Link Status] panels allow the root cause of many hardware issues to be determined and resolved. If you need help with a CL hardware issue I recommend posting these screen shots. Link to comment Share on other sites More sharing options...
kcuestag Posted February 16, 2016 Author Share Posted February 16, 2016 From what you have said it's impossible to even guess Sorry, never used that program, here you go. USB BUS: http://puu.sh/n9uHr/f9bd68813a.png Link Devices: http://puu.sh/n9uJN/c2454daa36.png However I cannot find "Link Status" anywhere. :( Link to comment Share on other sites More sharing options...
red-ray Posted February 16, 2016 Share Posted February 16, 2016 I suspect the [Port 0.7] device is the H110iGT and the firmware has crashed. Shutdown the system and unplug it from the mains for 2 minutes, then reboot and check [uSB Bus] + [Link Devices] again. Do as [Link Devices] specifies and also post [Link Status] Link to comment Share on other sites More sharing options...
kcuestag Posted February 16, 2016 Author Share Posted February 16, 2016 I suspect the [Port 0.7] device is the H110iGT and the firmware has crashed. Shutdown the system and unplug it from the mains for 2 minutes, then reboot and check [uSB Bus] + [Link Devices] again. Do as [Link Devices] specifies and also post [Link Status] That worked, shutted down and unplugged from the wall for 2 minutes and it detects it now. Thanks a lot for the help. :D: Link to comment Share on other sites More sharing options...
GamesTV Posted March 4, 2016 Share Posted March 4, 2016 Hey m8! I recently had a similar problem with my H110i GT.. Try this out it worked for me.. Completely ignore the USB error or w.e it says.. Right click on My computer > Properties > Device Manager In there look for any other driver / program that might have an error.. For me it was the "ethernet controller driver" Instead of trying to fix the Cooler i went and downloaded LAN Drivers for my motherboard ... The second i did that, and restarted my computer.. IT ALL FIXED! So maybe the problem isnt with the cooler it can be with other stuff surrounding it .. Link to comment Share on other sites More sharing options...
red-ray Posted March 4, 2016 Share Posted March 4, 2016 Completely ignore the USB error or w.e it says.. To me this advise seems as sensible as https://en.wikipedia.org/wiki/Infinite_monkey_theorem, though I guess it may work once in a while :biggrin:. I feel if you don't know why you fixed it then you probably haven't fixed it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.