Holton0289 Posted August 31, 2014 Share Posted August 31, 2014 I see that these fans are 25mm thick. My radiators came with 30mm screws. Only other option i see is to buy other screws but can only find 35mm. 2 questions. Will 30mm be too much to mount fans directly to the radiator, not going through the case without busting the fins? Fans---Rad---Case Will 30mm work to mount in reverse, with the screw going through the case, fan and into rad? Case----Fans---Rad Link to comment Share on other sites More sharing options...
wytnyt Posted August 31, 2014 Share Posted August 31, 2014 if you use a washer the 30mm should work,just screw them on by testing before mounting.,this way you can see the actual depth their going in... Link to comment Share on other sites More sharing options...
Holton0289 Posted August 31, 2014 Author Share Posted August 31, 2014 Do they come with washers? Dont want a silver washer on top. guess i could hide it. Link to comment Share on other sites More sharing options...
Holton0289 Posted August 31, 2014 Author Share Posted August 31, 2014 And will 30 not be enough if going through the case too? The 900d's frame is a couple mm at least. Link to comment Share on other sites More sharing options...
Speed Posted September 4, 2014 Share Posted September 4, 2014 Grind or hacksaw them to the length you want, then use a jeweler's file to restore the threads on the end. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.