Xenpaie Posted August 17, 2014 Share Posted August 17, 2014 Ok, so i installed my H80i today and the fans on it seem to be running on max. I have heard audio samples of what it should sound like and mine is nowhere near that. Also i cannot adjust or change any of the fan settings at all, the profiles dont work neither does adjusting the max RPM. If anyone can please help me with this it would be much appreciated because its getting rather annoying and warm :( Thankyou Link to comment Share on other sites More sharing options...
wytnyt Posted August 17, 2014 Share Posted August 17, 2014 what os and software version? is it being recognized in link? Link to comment Share on other sites More sharing options...
Xenpaie Posted August 17, 2014 Author Share Posted August 17, 2014 Yes it is in link, and im on Windows 7 64bit Link to comment Share on other sites More sharing options...
wytnyt Posted August 17, 2014 Share Posted August 17, 2014 unknowing your software version,id suggest using the .4816 version,it works best for me in all my builds,just make sure to delete the apps folder and do a full cold boot... Link to comment Share on other sites More sharing options...
Xenpaie Posted August 17, 2014 Author Share Posted August 17, 2014 Ok, will try that and post how it goes. Thankyou :) Link to comment Share on other sites More sharing options...
wytnyt Posted August 17, 2014 Share Posted August 17, 2014 keep us posted... Link to comment Share on other sites More sharing options...
Xenpaie Posted August 17, 2014 Author Share Posted August 17, 2014 Ok, i have done all of that and tried numerous things and looked over it multiple times just to make sure, but unfortunately it didn't work. Here is a picture my Link if it helps, i can also provide a video of the boot up so you can hear how loud it is. http://gyazo.com/78568a9782ca9708cce7b88c2fe5731e Link to comment Share on other sites More sharing options...
wytnyt Posted August 17, 2014 Share Posted August 17, 2014 what fans are you using? are you using a y splitter? Link to comment Share on other sites More sharing options...
Xenpaie Posted August 17, 2014 Author Share Posted August 17, 2014 Im using the two corsair fans that come with it, and no they are plugged into the mobo.. which im guessing is wrong xD Link to comment Share on other sites More sharing options...
wytnyt Posted August 17, 2014 Share Posted August 17, 2014 thats why their not seen in link as i thought;): yes they need to be connected to the hydro,,the m/b only runs at 100% rpm... Link to comment Share on other sites More sharing options...
Xenpaie Posted August 17, 2014 Author Share Posted August 17, 2014 Wow, im bad.. im sorry for wasting your time. It wasnt in the install manual so i presumed it wasnt needed, i will plug it in now and report back Link to comment Share on other sites More sharing options...
wytnyt Posted August 18, 2014 Share Posted August 18, 2014 you didnt waste my time,if you dont know then you dont know;): yes let us know... Link to comment Share on other sites More sharing options...
Xenpaie Posted August 18, 2014 Author Share Posted August 18, 2014 Ok, this confuses the hell out of me.. But the Y splitter, how does it connect to the fans? It might be because it's late and my brain isn't quite all there because I can't seem to work it out :'D Link to comment Share on other sites More sharing options...
wytnyt Posted August 18, 2014 Share Posted August 18, 2014 theres a covering you need to pull off,sorry shoulda mentioned this... Link to comment Share on other sites More sharing options...
thenosbod Posted August 18, 2014 Share Posted August 18, 2014 have you taken the terminal covers off the end of the y piece? they should pull off Link to comment Share on other sites More sharing options...
Xenpaie Posted August 18, 2014 Author Share Posted August 18, 2014 Oh wow.. Corsair pls xD my bad it looks so obvious now Link to comment Share on other sites More sharing options...
Xenpaie Posted August 18, 2014 Author Share Posted August 18, 2014 Ok, so now I have a CPU fan error showing up on boot :P any ideas? Link to comment Share on other sites More sharing options...
wytnyt Posted August 18, 2014 Share Posted August 18, 2014 yes take the small tach lead coming from the hydro and connect it to the m/b cpu-fan... Link to comment Share on other sites More sharing options...
Xenpaie Posted August 18, 2014 Author Share Posted August 18, 2014 Thankyou so much :) 10/10 my ears are no longer bleeding, just need to turn the fans around now -_- Link to comment Share on other sites More sharing options...
wytnyt Posted August 18, 2014 Share Posted August 18, 2014 lol,your welcome... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.