datas Posted August 10, 2014 Share Posted August 10, 2014 Hi guys, I wonder if any one can help at all? Started suffering from BSOD and it would seem when I have all the memory modules installed that it does it. I am running now with just 2 sticks in but as soon as I put all the 4 sticks of ram in then i suffer from BSOD. I've tried swapping them all about and I have tried 1, 2, 3 sticks and it works but as soon as I get that 4th stick installed then "game over" Also, is the attached sticks actually 2 gig and not 4 gig sticks..... Thanks ----------------------------------------------------------------------- Mainboard Model M5A88-V EVO Processor 1 ID = 0 Number of cores 6 (max 6) Number of threads 6 (max 6) Name AMD Phenom II X6 1100T Codename Thuban Specification AMD Phenom II X6 1100T Processor Package Socket AM3 (938) CPUID F.A.0 Extended CPUID 10.A Core Stepping PH-E0 Technology 45 nm TDP Limit 126 Watts Core Speed 927.8 MHz Multiplier x Bus Speed 4.0 x 232.0 MHz HT Link speed 2087.6 MHz Stock frequency 3300 MHz Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64, AMD-V L1 Data cache 6 x 64 KBytes, 2-way set associative, 64-byte line size L1 Instruction cache 6 x 64 KBytes, 2-way set associative, 64-byte line size L2 cache 6 x 512 KBytes, 16-way set associative, 64-byte line size L3 cache 6 MBytes, 48-way set associative, 64-byte line size FID/VID Control yes Min FID 4.0x # of P-States 5 P-State FID 0x15 - VID 0x08 - IDD 16 (18.50x - 1.450 V) P-State FID 0x11 - VID 0x12 - IDD 16 (16.50x - 1.325 V) P-State FID 0x9 - VID 0x14 - IDD 12 (12.50x - 1.300 V) P-State FID 0x1 - VID 0x16 - IDD 9 (8.50x - 1.275 V) P-State FID 0x100 - VID 0x1C - IDD 5 (4.00x - 1.200 V) Chipset Northbridge AMD 880G rev. 00 Southbridge AMD SB850 rev. 40 Graphic Interface PCI-Express PCI-E Link Width x16 PCI-E Max Link Width x16 Memory Type DDR3 Memory Size 4 GBytes Channels Dual, (Unganged) Memory Frequency 618.5 MHz (3:8) CAS# latency (CL) 9.0 RAS# to CAS# delay (tRCD) 9 RAS# Precharge (tRP) 9 Cycle Time (tRAS) 24 Bank Cycle Time (tRC) 27 Command Rate (CR) 1T Uncore Frequency 2087.6 MHz Memory SPD DIMM # 1 SMBus address 0x50 Memory type DDR3 Module format UDIMM Manufacturer (ID) Corsair (7F7F9E00000000000000) Size 2048 MBytes Max bandwidth PC3-10700H (667 MHz) Part number CMX4GX3M2A1600C9 Number of banks 8 Nominal Voltage 1.50 Volts EPP no XMP yes XMP revision 1.2 AMP no JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 6.0-6-6-16-23 @ 444 MHz JEDEC #2 8.0-8-8-22-30 @ 592 MHz JEDEC #3 9.0-9-9-24-34 @ 666 MHz XMP profile XMP-1600 Specification PC3-12800 Voltage level 1.650 Volts Min Cycle time 1.250 ns (800 MHz) Max CL 9.0 Min tRP 11.25 ns Min tRCD 11.25 ns Min tWR 15.00 ns Min tRAS 30.00 ns Min tRC 50.63 ns Min tRFC 110.00 ns Min tRTP 7.50 ns Min tRRD 7.50 ns Command Rate 2T XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage) XMP #1 6.0-6-6-16-27-2T @ 533 MHz (1.650 Volts) XMP #2 9.0-9-9-24-41-2T @ 800 MHz (1.650 Volts) DIMM # 2 SMBus address 0x51 Memory type DDR3 Module format UDIMM Manufacturer (ID) Corsair (7F7F9E00000000000000) Size 2048 MBytes Max bandwidth PC3-10700H (667 MHz) Part number CMX4GX3M2A1600C9 Number of banks 8 Nominal Voltage 1.50 Volts EPP no XMP yes XMP revision 1.2 AMP no JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 6.0-6-6-16-23 @ 444 MHz JEDEC #2 8.0-8-8-22-30 @ 592 MHz JEDEC #3 9.0-9-9-24-34 @ 666 MHz XMP profile XMP-1600 Specification PC3-12800 Voltage level 1.650 Volts Min Cycle time 1.250 ns (800 MHz) Max CL 9.0 Min tRP 11.25 ns Min tRCD 11.25 ns Min tWR 15.00 ns Min tRAS 30.00 ns Min tRC 50.63 ns Min tRFC 110.00 ns Min tRTP 7.50 ns Min tRRD 7.50 ns Command Rate 2T XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage) XMP #1 6.0-6-6-16-27-2T @ 533 MHz (1.650 Volts) XMP #2 9.0-9-9-24-41-2T @ 800 MHz (1.650 Volts) -------------------------------------------------------------- http://i58.tinypic.com/2q0j4ed.jpg http://i62.tinypic.com/mjn591.jpg http://i57.tinypic.com/2ymywjq.jpg http://i62.tinypic.com/vhzuyq.jpg Link to comment Share on other sites More sharing options...
datas Posted August 11, 2014 Author Share Posted August 11, 2014 some sort of error, I have asked to return it. :) http://i62.tinypic.com/28vuhlh.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.