arg-ist Posted July 31, 2014 Share Posted July 31, 2014 JUMBO CASE - Custom build This time not CORSAİR case and not case mod , Custom made… And a quite big case… At one of my friend’s request we have planned a case so; The case will be made for 2 Mainboards It will have the opportunity of a large watercooling(25X120 rads) The Evo radiator which is used will be moded. From 3 channels, the one in the middle will be connected to the compressor. With this radiator, if it is needed, by running the compressor, extra cooling can be provided. The frame of the case is sheet iron profile. Used 2 mm aluminum plates. Then , firstly it is undercoated with epoxy ground coat, later it is painted mat black with spray paint . The necessary plexi pieces are self made .and it is delivered to my friend as a naked case. After this, hardware will be established by him. I completed my duty by making the case only. The next phase is depend on my friend’s studies. http://imagizer.imageshack.us/v2/640x480q90/833/5yq9.jpg http://imagizer.imageshack.us/v2/640x480q90/401/1e6d.jpg http://imagizer.imageshack.us/v2/640x480q90/41/z1y8.jpg http://imagizer.imageshack.us/v2/640x480q90/28/ookt.jpg http://imagizer.imageshack.us/v2/640x480q90/843/esfg.jpg http://imagizer.imageshack.us/v2/640x480q90/844/ttk4.jpg http://imagizer.imageshack.us/v2/640x480q90/138/bs5h.jpg http://imagizer.imageshack.us/v2/640x480q90/703/yagm.jpg http://imagizer.imageshack.us/v2/640x480q90/856/kzyn.jpg http://imagizer.imageshack.us/v2/640x480q90/812/srcv.jpg http://imagizer.imageshack.us/v2/640x480q90/837/eied.jpg U[/font][/font][/font] OTHER WORKLOGS MMT 900 D Case http://forum.corsair.com/forums/showthread.php?t=130728 ER36PO Thermaltake Level 10 GT Snow Edition Case http://forum.corsair.com/forums/showthread.php?t=130848 12 Angry Men 900 D Case http://forum.corsair.com/forums/showthread.php?t=130939 4Way HDD Switcher http://forum.corsair.com/forums/showthread.php?t=131284 How to make a BENCH CASE from an old ATX case http://forum.corsair.com/forums/showthread.php?t=131089 Graphic Equalizer Display http://forum.corsair.com/forums/showthread.php?t=133084 PLAYDOH SILVERSTONE TJ07 http://forum.corsair.com/forums/showthread.php?t=131460 TRANSFORMER CASE http://forum.corsair.com/forums/showthread.php?t=132019 Link to comment Share on other sites More sharing options...
arg-ist Posted August 1, 2014 Author Share Posted August 1, 2014 Coated with alu plates 2mm thick alu plates and with necessary grills.. http://imagizer.imageshack.us/v2/640x480q90/854/tk9r.jpg http://imagizer.imageshack.us/v2/640x480q90/716/w2ul.jpg http://imagizer.imageshack.us/v2/640x480q90/703/ggoz.jpg http://imagizer.imageshack.us/v2/640x480q90/837/eied.jpg http://imagizer.imageshack.us/v2/640x480q90/20/fzly.jpg except the Evo are all rads on the top . therfore , ı made a separate upper chamber for rads ın an anusual form . the rads are placed like terrace houses http://imagizer.imageshack.us/v2/640x480q90/545/br9a.jpg http://imagizer.imageshack.us/v2/640x480q90/20/h5ro.jpg http://imagizer.imageshack.us/v2/640x480q90/706/rxdk.jpg http://imagizer.imageshack.us/v2/640x480q90/835/2u7t.jpg Link to comment Share on other sites More sharing options...
arg-ist Posted August 1, 2014 Author Share Posted August 1, 2014 update 08/08/2014 All case parts are firstly undercoated with epoxy ground coat, later it is painted mat black with spray paint . http://imagizer.imageshack.us/v2/800x600q90/208/t0fa.jpg http://imagizer.imageshack.us/v2/800x600q90/19/thuj.jpg http://imagizer.imageshack.us/v2/800x600q90/547/l9is.jpg The slide at rear is for evo rad and for compressor(ecovatt) http://imagizer.imageshack.us/v2/800x600q90/13/k8is.jpg MB tray from an old case used as BTX http://imagizer.imageshack.us/v2/800x600q90/138/6qyb.jpg 2.nd MB tray used in ATX form A different cable management on the MB tray as a window and shark's tooth for cables. http://imagizer.imageshack.us/v2/800x600q90/560/vy8h.jpg http://imagizer.imageshack.us/v2/800x600q90/850/ej6d.jpg Front and back panels redy for ATX and BTX and PSU trays for 2x PSU http://imagizer.imageshack.us/v2/800x600q90/18/okm0.jpg Mounted with rivets. http://imagizer.imageshack.us/v2/800x600q90/36/d2hj.jpg http://imagizer.imageshack.us/v2/800x600q90/835/ep5i.jpg http://imagizer.imageshack.us/v2/800x600q90/853/7bbm.jpg http://imagizer.imageshack.us/v2/800x600q90/14/x1yf.jpg http://imagizer.imageshack.us/v2/800x600q90/14/q0mx.jpg http://imagizer.imageshack.us/v2/800x600q90/30/2h5r.jpg MB tray at left is for gaming PC as ATX form , and MB tray at right is for download PC in BTX form and downloading 7X24 … Between 2 MB an plexi self made 5.25 cage tower http://imagizer.imageshack.us/v2/800x600q90/853/pgfz.jpg The room at bottom Left for PSU 1 at back- vertical and place for pumps Right for PSU at back – vertical and place for pumps İn the middle room for compressor ( temp isolated ) and ventilated with an extra fan And fire logo at the front cover from plexi and illuminated http://imagizer.imageshack.us/v2/800x600q90/542/f1ot.jpg 2X MB trays and enough free place over the trays and bottom the trays. Expecially for custom watercooled HDD s. http://imagizer.imageshack.us/v2/800x600q90/819/i9mf.jpg http://imagizer.imageshack.us/v2/800x600q90/36/na27.jpg http://imagizer.imageshack.us/v2/800x600q90/801/yisk.jpg 3 great holes for Jumbo fans and many holes for grommets of tubing http://imagizer.imageshack.us/v2/800x600q90/839/h0ed.jpg Link to comment Share on other sites More sharing options...
arg-ist Posted August 1, 2014 Author Share Posted August 1, 2014 there are alot of HDD watercoolers or noise ısolated - internal hard drive enclosure,to reduce HD noise . it is impossibele to make a passive HDD silencer and cooler together. but it is possible to make noise isolated HDD watercooler. And done… http://imagizer.imageshack.us/v2/640x480q90/20/lixc.jpg http://imagizer.imageshack.us/v2/640x480q90/35/a9f3.jpg http://imagizer.imageshack.us/v2/640x480q90/197/5u9s.jpg http://imagizer.imageshack.us/v2/640x480q90/706/wakr.jpg http://imagizer.imageshack.us/v2/640x480q90/14/vsbi.jpg http://imagizer.imageshack.us/v2/800x600q90/196/4e0d.jpg http://imagizer.imageshack.us/v2/640x480q90/6/k5np.jpg http://imagizer.imageshack.us/v2/640x480q90/32/f5mw.jpg http://imagizer.imageshack.us/v2/640x480q90/802/dgmn.jpg http://imagizer.imageshack.us/v2/640x480q90/809/mjhr.jpg http://imagizer.imageshack.us/v2/640x480q90/811/7pa5.jpg http://imagizer.imageshack.us/v2/640x480q90/9/b76g.jpg http://imagizer.imageshack.us/v2/640x480q90/7/f8tl.jpg http://imagizer.imageshack.us/v2/640x480q90/268/l89i.jpg http://imagizer.imageshack.us/v2/640x480q90/856/9h0i.jpg http://imagizer.imageshack.us/v2/640x480q90/197/i71d.jpg http://imagizer.imageshack.us/v2/640x480q90/89/x3jo.jpg http://imagizer.imageshack.us/v2/640x480q90/827/73a4.jpg http://imagizer.imageshack.us/v2/640x480q90/22/1mpa.jpg http://imagizer.imageshack.us/v2/800x600q90/842/0xnc.jpg http://imagizer.imageshack.us/v2/640x480q90/197/qr10.jpg Link to comment Share on other sites More sharing options...
arg-ist Posted August 2, 2014 Author Share Posted August 2, 2014 Update 19/08/2014 except the Evo are all rads on the top . therfore , ı made a separate upper chamber for rads ın an anusual form . the rads are placed like terrace houses . and a midplate with 3 great fan holes between the upper chamber and the case details http://imagizer.imageshack.us/v2/800x600q90/198/izko.jpg http://imagizer.imageshack.us/v2/800x600q90/823/5esp.jpg http://imagizer.imageshack.us/v2/800x600q90/850/5ktg.jpg http://imagizer.imageshack.us/v2/800x600q90/196/b88j.jpg http://imagizer.imageshack.us/v2/800x600q90/854/tizw.jpg http://imagizer.imageshack.us/v2/800x600q90/827/f5ai.jpg http://imagizer.imageshack.us/v2/800x600q90/600/ln7y.jpg http://imagizer.imageshack.us/v2/800x600q90/543/df0w.jpg http://imagizer.imageshack.us/v2/800x600q90/513/cg3z.jpg http://imagizer.imageshack.us/v2/800x600q90/707/83oj.jpg http://imagizer.imageshack.us/v2/800x600q90/541/tcwe.jpg http://imagizer.imageshack.us/v2/800x600q90/809/y03w.jpg http://imagizer.imageshack.us/v2/800x600q90/827/owf9.jpg Link to comment Share on other sites More sharing options...
arg-ist Posted August 2, 2014 Author Share Posted August 2, 2014 update 20/08/2014 To open the heavy upper chamber with full of rads , ı have used lifts, that ı used many times on my cases.For example on a Bench case, ı used these gas spring arm. 4 years ago.. http://imagizer.imageshack.us/v2/800x600q90/571/tkrv.jpg And ı made these bench http://imagizer.imageshack.us/v2/800x600q90/716/zl4p.jpg http://imagizer.imageshack.us/v2/800x600q90/842/spuc.jpg Today frozen cpu uses it… http://imagizer.imageshack.us/v2/800x600q90/843/nesq.jpg and ı used the same gas spring arm on my JUMBO case too. To open the upper part of the case. http://imagizer.imageshack.us/v2/800x600q90/198/izko.jpg İt contais 16X 120mm rad …and I have placed the rads like terracce houses , like Frozen CPU http://imagizer.imageshack.us/v2/800x600q90/706/k0h1.jpg http://imagizer.imageshack.us/v2/800x600q90/843/esfg.jpg http://imagizer.imageshack.us/v2/800x600q90/707/83oj.jpg You can see how does it work at this Video. [ame] [/ame] Link to comment Share on other sites More sharing options...
arg-ist Posted August 2, 2014 Author Share Posted August 2, 2014 reserved for updates Link to comment Share on other sites More sharing options...
thenosbod Posted August 2, 2014 Share Posted August 2, 2014 This is going to be one heavy computer! Has it been risk assessed??? lol Link to comment Share on other sites More sharing options...
arg-ist Posted August 6, 2014 Author Share Posted August 6, 2014 This is going to be one heavy computer! Has it been risk assessed??? lol İf you think the safety of concrete slab becouse of weight.. it is used at ground floor in a country house… No need to worry…:laughing: Of course it is a big case…JUMBO , but how much . We can compare Corsair 900D is: 25.6’’ X 27.2’’ X9.9’’ (650 mm X 692 mm X 252 mm) Magnum STH 10 is: 32.25’’ X 26.56’’ X 11.25’’ (819 mm X 675 mm X 286 mm) And JUMBO is 35.30’’ X 29” +11’’ X 11’’ ( 900 mm X 800mm + 300mm X 280 mm) I have a little house. , and it is built in a 8 M2 room for my frİend. And he has a big room for the case. We must not forget it is built: for 2 Mainbords + a big Watercool sytem with 25 x120 mm rads + compressor cooling Link to comment Share on other sites More sharing options...
arg-ist Posted August 8, 2014 Author Share Posted August 8, 2014 update 08/08/2014 Link to comment Share on other sites More sharing options...
websterx01 Posted August 9, 2014 Share Posted August 9, 2014 What is this computer for? ! More importantly, how can I become as awesome as you! :p I haven't really done much modding (did a psu once), but this is. ... building and design, its really cool man! Link to comment Share on other sites More sharing options...
arg-ist Posted August 10, 2014 Author Share Posted August 10, 2014 What is this computer for? ! More importantly, how can I become as awesome as you! :p I haven't really done much modding (did a psu once), but this is. ... building and design, its really cool man! We have a proverb in Turkey. it means : “ If you work as much as me , you can make much better from me… “ This is the only way to make better worklogs. Link to comment Share on other sites More sharing options...
arg-ist Posted August 28, 2014 Author Share Posted August 28, 2014 Last photos from the case worklog http://imagizer.imageshack.us/v2/800x600q90/845/7e0t.jpg http://imagizer.imageshack.us/v2/800x600q90/809/z25x.jpg http://imagizer.imageshack.us/v2/800x600q90/542/f1ot.jpg http://imagizer.imageshack.us/v2/800x600q90/198/xory.jpg http://imagizer.imageshack.us/v2/800x600q90/585/zxm6.jpg http://imagizer.imageshack.us/v2/800x600q90/836/2w51.jpg http://imagizer.imageshack.us/v2/800x600q90/853/pgfz.jpg http://imagizer.imageshack.us/v2/800x600q90/542/kpwy.jpg http://imagizer.imageshack.us/v2/800x600q90/542/8pv3.jpg http://imagizer.imageshack.us/v2/800x600q90/850/8k9w.jpg With these photos my worklog for case is finished. Hardware installing is not my worklog My frend is building WC . these are some photos from his mod The longest rad from the case 7x140mm http://imagizer.imageshack.us/v2/800x600q90/844/83t6.jpg As ı said, he modded an EVO rad. Evo has 3 paralel chanels http://imagizer.imageshack.us/v2/800x600q90/842/awo6.jpg he used the center channel for compressor cooling for the rad ,as a phase change system and then the left and right channels for watercooling. http://imagizer.imageshack.us/v2/800x600q90/855/x5nh.jpg http://imagizer.imageshack.us/v2/800x600q90/36/8muj.jpg http://imagizer.imageshack.us/v2/800x600q90/585/qwtn.jpg http://imagizer.imageshack.us/v2/800x600q90/571/5jx9.jpg http://imagizer.imageshack.us/v2/800x600q90/841/pvwm.jpg FINAL Youtube added 20/09/2014 [ame] [/ame] [ame] [/ame] Link to comment Share on other sites More sharing options...
SirAngry Posted August 31, 2014 Share Posted August 31, 2014 This thing looks like an absolute BEAST!!! Always impressed when people build their own cases. Really looking forward to seeing how it all turns out. Link to comment Share on other sites More sharing options...
gotto Posted September 1, 2014 Share Posted September 1, 2014 this is gonna be a really heavy pc. and with a reefer unit on it I hope that he puts casters on it to move it around :o: Link to comment Share on other sites More sharing options...
Lady Fitzgerald Posted September 2, 2014 Share Posted September 2, 2014 ...I hope that he puts casters on it to move it around :o: Or has a forklift or pallet jack. :laughing: Link to comment Share on other sites More sharing options...
gotto Posted September 2, 2014 Share Posted September 2, 2014 Or has a forklift or pallet jack. :laughing::D: I want one I just want to move it around LOL. the 800D and the 900D can get heavy that's enough for me :roll: Link to comment Share on other sites More sharing options...
Lady Fitzgerald Posted September 2, 2014 Share Posted September 2, 2014 I used to drive forklifts, ranging from 2,000 lb. to 20,000 lb. rating, for a living. They can be fun! Link to comment Share on other sites More sharing options...
gotto Posted September 2, 2014 Share Posted September 2, 2014 I used to drive forklifts, ranging from 2,000 lb. to 20,000 lb. rating, for a living. They can be fun![/QUOUTE they do look like lots of fun iv'e seen people driving around al the time and sometimes they haul :roll: well you know what I mean:D: Link to comment Share on other sites More sharing options...
Lady Fitzgerald Posted September 2, 2014 Share Posted September 2, 2014 I used to drive forklifts, ranging from 2,000 lb. to 20,000 lb. rating, for a living. They can be fun![/QUOUTE they do look like lots of fun iv'e seen people driving around al the time and sometimes they haul :roll: well you know what I mean:D: I believe "transport donkey" is the phrase you are looking for ;):. The last thing anyone needs on the job is a hot dogger on a forklift. Those things are dangerous in the wrong hands. I think the most fun ones I ever drove were some John Deere skid steers (a lot like Bobcats). You literally drove those like a tank, only umpteen times more nimble. You normally ran them with the throttle set to flat out. They could turn on a dime and get 9.5¢ change. Link to comment Share on other sites More sharing options...
thenosbod Posted September 2, 2014 Share Posted September 2, 2014 I have driven a few of them in my time. The rough terrain ones were the most fun. My licences have expired now though. Link to comment Share on other sites More sharing options...
Lady Fitzgerald Posted September 2, 2014 Share Posted September 2, 2014 I have driven a few of them in my time. The rough terrain ones were the most fun. My licences have expired now though. I retired from the company I drove for ten years ago (I worked in warehousing but that involved a lot of forklift driving as well as some mobile and pendant cranes) so I'm not exactly certified anymore. Link to comment Share on other sites More sharing options...
wytnyt Posted September 12, 2014 Share Posted September 12, 2014 very fun machines indeed we own several skid steers,several track steers and sky tracks but nothing beats putting one of these to work...;): we currently have 5 of these 30-80 tonners and in the process of building another http://i39.photobucket.com/albums/e152/wytnyt123/other/5003sr.jpg Link to comment Share on other sites More sharing options...
arg-ist Posted September 20, 2014 Author Share Posted September 20, 2014 youtube added 20/09/2014 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.