Iamazn Posted July 21, 2012 Share Posted July 21, 2012 -Should I replace the fans on the H100 or are the stock fans good? -How do I test the H100 for leaks? (How exactly is it done, how long should it be tested for, etc) Link to comment Share on other sites More sharing options...
Toasted Posted July 21, 2012 Share Posted July 21, 2012 The stock fans are good, But some people replace them since it may be loud for them. Note that if you go for after market fans, The H100 fan controller may not work with the fans. You can test the H100 by plugging it in to a molex connector. Link to comment Share on other sites More sharing options...
Iamazn Posted July 21, 2012 Author Share Posted July 21, 2012 You can test the H100 by plugging it in to a molex connector. I'm a noob when it comes to this stuff, are molex connectors found on the PSU or what? Link to comment Share on other sites More sharing options...
Toasted Posted July 21, 2012 Share Posted July 21, 2012 Plug the H100 into a molex connector on your PSU, Put paper towels under the H100. Turn on the PSU and run it for a time you think is ok for a leak test. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.