Pygasm Posted January 12, 2019 Share Posted January 12, 2019 Im currently using iCUE paired with an H155I and Two LL120 fans plugged into the Lighting Hub PRO. Whenever I put the PC to sleep [i do this often], the Corsair USBxp driver seems to either crash or partially break, as when I turn the computer back on, the H115i's head reverts to the default Rainbow configuration, and cannot be changed. When restarting iCUE, both my Fans and H115i both disappear from the dashboard, and when in Windows Settings > Devices, the USBxp driver shows up with a footnote that reads "Setup Incomplete, Restart your PC". Restarting does fix the problem, but it will happen again as soon as I put the computer back to sleep and restart it. Is this common? Is there anything I can do about this? Thanks! Link to comment Share on other sites More sharing options...
cplifj Posted January 12, 2019 Share Posted January 12, 2019 is your pc really that slow booting that you need to use "sleep" mode ? most , also older, pc with SSD as bootdisk are just as fast booting as returning from sleepmode. You might consider dropping Hybernate and or sleep modes. Added bonus is a small extra energy savings. Link to comment Share on other sites More sharing options...
Pygasm Posted January 12, 2019 Author Share Posted January 12, 2019 It does run on an SSD now so I could use Shut Down, but I just really don't like waiting for 7 programs to set themselves up again and again. Link to comment Share on other sites More sharing options...
Winsniper4 Posted September 18, 2020 Share Posted September 18, 2020 To fix this !!! Go to "Device and Printer" --> click right on the "Corsair Device" --> click "Troubleshoot" and "Run" --> Window will fix the problem automatically!!! After that problem "iCue not working when resuming from sleep" will fixed!!! https://drive.google.com/file/d/19HTq3cH5Ni92rIo-Nx_YIRV4zcsypF5p/view?usp=sharing Link to comment Share on other sites More sharing options...
Recommended Posts