WhiskeyOmega Posted January 31, 2017 Share Posted January 31, 2017 I would like to have a blue and green interchanging but have it so WASD and the macros be 2 colors switching whilst at the same time have the other keys be the other color of the 2 and have them switch. Is this possible because i find it not possible to select certain keys to change them. Am i stuck with 2 colors switching on the whole keyboard? Link to comment Share on other sites More sharing options...
Toasted Posted January 31, 2017 Share Posted January 31, 2017 You can select certain keys by going into advanced mode. From there you can create multiple lighting layers which should allow you to configure the lighting to your preference. Take a read of the unofficial CUE 2 manual as it may help. http://bit.do/CUE2M Link to comment Share on other sites More sharing options...
WhiskeyOmega Posted January 31, 2017 Author Share Posted January 31, 2017 You can select certain keys by going into advanced mode. From there you can create multiple lighting layers which should allow you to configure the lighting to your preference. Take a read of the unofficial CUE 2 manual as it may help. http://bit.do/CUE2M Mind = Blown thanks got it set up. just wish i could have the mouse now not on advanced setup but 1st world problems Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.