Jong Posted August 27, 2015 Share Posted August 27, 2015 I'm running latest CUE and firmware, but this happened with the last version too. Occasionally on reboot Windows will not let me login. I have to unplug/re-plug the keyboard to get it to work. It does not recognise my password which includes a mix of numbers and letters which are both upper and lower case. I think the problem is the upper case letters. I don't think the shift key is working. Of course it's hard to see as the password is obfuscated, but other user accounts that only have lower case letters do not seem affected. Link to comment Share on other sites More sharing options...
Jong Posted August 29, 2015 Author Share Posted August 29, 2015 *Bump No one else seeing this? Seems the K95 does not always initialise correctly after a reboot. Link to comment Share on other sites More sharing options...
Medieval Nerd Posted August 29, 2015 Share Posted August 29, 2015 I've had initializing issues with my K95 RGB, but usually after I do quick cycles to fill up my loop, sometimes if I power it on/off too fast, it can refuse to initialize during the boot up process. But usually just pulling the USB plug out/back in, the KB resumed it's 'normal' functionality. Link to comment Share on other sites More sharing options...
Toasted Posted August 29, 2015 Share Posted August 29, 2015 Have you tried moving the switch to BIOS mode? Does that help? Link to comment Share on other sites More sharing options...
Jong Posted August 29, 2015 Author Share Posted August 29, 2015 Nope. Sadly the BIOS switch does not help :(. Only unplugging. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.